Mirror smooth wear-resistant steel plate
Main features of mirror smooth wear-resistant steel plate: high hardness, high wear resistance, smooth, mirror surface, non-bonding
Technical parameters of mirror smooth wear-resistant steel plate:
|Wear layer thickness||2-15mm||main alloy||chromium|
|Installation method||bolt, welded||hardness||HRC60 and above|
|proportion||7.8||Cr content||over 30|
|Production Process||High temperature composite||Extremely high quality||Class A|
|Operating temperature||-60℃~1000℃||cutting method||Plasma cutting recommended|
|delivery cycle||Spot goods||payment method||10-0|
|Can be customized||Can||Drawing design||can provide|
The mirror-smooth composite wear-resistant steel plate produced by our company is used in the parts that are subjected to strong wear and tear. It takes advantage of the wear resistance of traditional high-chromium cast iron plates for abrasive wear and corrosion wear, and improves the toughness of high-chromium iron plates. The disadvantage is that the shape of the structural part is flexed and the welded seam is processed, resulting in a product.
Mirror smooth wear-resistant steel plate is a product made of ordinary carbon steel as the substrate material, and it is made of wear-resistant hardening surfacing. This form of joint is a metallurgical bond and is very strong.
Three characteristics of mirror smooth wear-resistant steel plate:
First, the wear resistance is strong, which is 5 to 10 times the service life of ordinary steel plates.
Second, it has the same smooth surface as ordinary steel plates and no cracks. Ordinary wear-resistant composite steel plates have cracks and welding rods, and the surface is not smooth.
Third, the cost-effectiveness of life and cost is superior, and high-hardness wear-resistant steel plates with smooth surfaces can be produced, and the hardness of the wear-resistant layer can reach HRC60 or more.
It mainly uses Q235 steel plate as the base material, and is a special surfacing steel plate made by surfacing super wear-resistant alloy on it.
Mirror smooth wear-resistant steel plate has excellent wear resistance, which is one of its major characteristics.
Because of the precipitation of various carbides, it is most suitable for wear of parts that are subjected to strong abrasive wear and corrosion wear.
In addition, there are very few cracks, and the surfacing layer is neat and smooth.
Most of the general hardening surfacing will crack. The mirror smooth wear-resistant steel plate can not only ensure high hardness, but also reduce cracks through a special automatic welding method, and produce a clean wear-resistant steel plate with less deformation and high quality.
The shape of the mirror-finish wear-resistant steel plate is manufactured to the following dimensions. (The size can also be customized separately, please discuss with our sales staff.)
Mirror smooth steel sheet can be processed size list (substrate thickness + wear layer thickness)
(1) Above 6+4, the maximum board size can be 1500×3000;
(2) 4+2, 4+3, the maximum board size can be 250×2000;
(3) If the thickness of the mirror-surface composite wear-resistant steel plate substrate and the thickness of the wear-resistant layer are not listed in the table, you can negotiate with the sales staff of our company.