What is the stock of hardox 400 used for vehicle in Malaysia

We are world class steel HARDOX 400 used for vehicle materials supplier. We are engaed in providing raw steel materials such as steel plates / steel coils / steel sheets / steel pipes, deep processing and a series project design and solutions to clients. We guarantee to return goods for free for HARDOX 400 used for vehicle quality problem during its lifetime. Your satisfactory is our permanent pursue. We always welcome advise from clients to make self-improvement continously. And sincerely to build long-term cooperation with you.

ASTM A387 Grade 5 and ASTM A387 Grade 9 Steel plates HARDOX 400 used for vehicle have good corrosion and heat resistance for alloy element chromium and molybdenum, which is needed in sour oil gas industry.

HARDOX 400 used for vehicle, 30CrMnSiA steel plate is a kind of low alloy high strength steel with medium carbon, high strength and good weldability. After quenching and tempering, 30CrMnSiA steel has high strength, enough toughness and good hardenability. After quenching and tempering, 30CrMnSiA steel can be used as grinding wheel shaft, gear and sprocket. 30CrMnSiA steel has good processability, small deformation and good fatigue resistance. 30CrMnSiA steel is usually used for shaft, piston parts, etc. It is used for various special wear-resistant parts of automobiles and airplanes.

"The production method of seamless steel pipe can be roughly divided into cross rolling method (menesmann method) and extrusion method. The cross rolling method (menesmann method) is to pierce the tube blank with the cross roll first, and then extend it with the rolling mill. This method is fast in production, but requires high machinability of tube blank. It is mainly suitable for producing carbon steel and low alloy steel tube, HARDOX 400 used for vehicle tube.The extrusion method is to pierce the billet or ingot with a piercer, and then extrude it into a steel tube with an extruder. This method is less efficient than the cross rolling method and is suitable for the production of high-strength alloy steel tubes."

Chemical composition of 42CrMo seamless steel pipe: C: 0.38-0.45, Si: 0.17-0.37, Mn: 0.50-0.80, Cr: 0.90-1.20, Mo: 0.15-0.25, V: 0.15-0.30. Mechanical properties of 42CrMo seamless steel pipe: tensile strength: 1080 MPa, yield strength: 930 MPa, elongation after fracture: 12%, reduction of area: 45%, impact energy: 63J. Due to the effect of carbon and chromium content, HARDOX 400 used for vehicle, 42CrMo seamless steel pipe has better strength and hardenability, higher fatigue strength and resistance to multiple impact after quenching and tempering, good impact toughness at low temperature and no obvious temper brittleness. It is generally used after quenching and tempering.

The consistent tenet of honest management! Know the needs of customers, for the needs of customers, urgent customers think! Our quality is better for the HARDOX 400 used for vehicle same products, our price is lower for the same quality, and our service is better for the same price. welcome to purchase steel materials from our company. we have the professional team and good after-sale system to customers. our company HARDOX 400 used for vehicle is your best choose.

Before delivering our hot rolled plate product we apply various tests to check the quality of carbon steel HARDOX 400 used for vehicle plates such as- mechanical test, chemical test, hardness test, toughness test, eddy current test, impact test, micro test, flaring test, flattening test, etc. We are provided best packing for structural steel plates to avoid rust. Our after-sales service team will contact you if you have any question.