usage of hardox 400 steel plate specification

The company adheres to the "variety, quality and efficiency" road. We have established a technology center, a brand cultivation management system and a quality control system. Now the company has formed an independent innovation system integrating usage of HARDOX 400 steel production, learning, research and marketing. Our company has passed ISO9001 quality management system certification and ISO10012 measurement management system certification.

The hardness value of NM600 wear-resistant steel plate reaches 600 HBW, and it is generally used in extremely severe wear occasions, and mainly used to replace cast steel, chromium alloy cast iron and surface hardening metal usage of HARDOX 400 steel. Although the hardness of NM600 wear-resistant steel plate is very high, we can machine, weld and cut it. Although the hardness of NM600 wear-resistant steel plate is very high, it still has high impact toughness.

Just as usage of HARDOX 400 steel, the boiler steel plate also has strict control of chemical composition for the material, especially harmful elements such as phosphorus and sulfur, and residual elements such as chromium, nickel, and copper; during smelting, good deoxidation and removal of non-metallic inclusions should be carried out to ensure good quality, plasticity and toughness. The organizational structure requires uniformity, and the grain size is controlled within a certain range; there are also strict requirements for surface quality and internal defects. In addition, the boiler steel plate mechanical properties at room temperature and high temperature must be guaranteed.

The blanking of the structural steel plate is first to find 90 degrees, and then use a tape measure and a powder line to draw the cutting range. According to the thickness of the carbon steel plate plus the cutting allowance, drilling is required. For the deep processing of usage of HARDOX 400 steel structural steel sections or profiles: First use a square ruler or a curved ruler to find 90 degrees, and then use a square ruler or a ruler to cut the line and add the cutting margin to the hole.

Chemical composition of 12Cr1MoV alloy steel plate: Carbon C: 0.08-0.15; Silicon Si: 0.17-0.37; Manganese Mn: 0.40-0.70; Sulfur S: allowable residual content ≤ 0.035; Phosphorus P: allowable residual content ≤ 0.035; Chromium Cr: 0.90-1.20; Nickel Ni: allowable residual content ≤ 0.030; Cu: allowable residual content ≤ 0.030; V: 0.15-0.30; Mo: 0.25-0.30.Delivery status of usage of HARDOX 400 steel, 12Cr1MoV alloy steel plate: delivered in heat treatment (normalizing, annealing or high temperature tempering) or non heat treatment status, and the delivery status shall be indicated in the contract.

When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.