The processing of hardox 400 machining

The application of wear-resistant steel plate, HARDOX 400 machining is very many, especially in the factory building. In terms of various operation control of wear-resistant steel plate, bending is more difficult to master, which is mainly due to the poor elasticity of the product. Of course, we have corresponding solutions. In order to bend the wear-resistant steel plate more simply and effectively, it is recommended to use hydraulic pipe bender for bending, and the corresponding mold should be equipped with the machine in advance. In this way, the wear-resistant steel plate will not have defects, the quality can be guaranteed, and the use effect will be better.

The production method of seamless steel pipe can be roughly divided into cross rolling method (menesmann method) and extrusion method. The cross rolling method (menesmann method) is to pierce the tube blank with the cross roll first, and then extend it with the rolling mill. This method is fast in production, but requires high machinability of tube blank. It is mainly suitable for producing carbon steel and low alloy steel tube, HARDOX 400 machining tube.

The factory is located in the central China, with convenient transportation and abundant resources. The main products are various construction steel plates, steel pipes, steel sections, and steel structure processing parts. Used in the HARDOX 400 machining manufacture of railway tracks, pressure vessels, boilers, hulls, bridges, various types of steel, etc. With an annual output of 2.23 million tons of steel plates, 2.04 million tons of steel pipes and 1.54 million tons of section steel in 2002, it is an important pig iron base in Henan Province.

The blanking of the structural steel plate is first to find 90 degrees, and then use a tape measure and a powder line to draw the cutting range. According to the thickness of the carbon steel plate plus the cutting allowance, drilling is required. For the deep processing of HARDOX 400 machining structural steel sections or profiles: First use a square ruler or a curved ruler to find 90 degrees, and then use a square ruler or a ruler to cut the line and add the cutting margin to the hole.