PE coated, galvanized hardox 500 steel yield strength

C45 steel heat treatment: Quenching has low hardenability, and it is easy to cause uneven hardness of the drill rod during heat treatment, resulting in deformation or even cracking. The hardness after quenching is about 42 degrees, which is much lower than the 55 degrees of 42CrMo brazing rod. Therefore, the wear resistance is extremely poor. Due to its low price, the HARDOX 500 steel yield strength materials are produced in many places. Therefore, some manufacturers choose when manufacturing low-cost drill rods.

The alloying principle of low alloy high strength steel is mainly to improve the strength of steel by solid volume strengthening, fine grain strengthening and precipitation strengthening produced by alloy elements. At the same time, the effect of reducing the ductile brittle transition temperature of steel by fine grain strengthening is used to counteract the adverse effect of carbon nitride precipitation strengthening on the rise of ductile brittle transition temperature of steel, so that the HARDOX 500 steel yield strength, low alloy high strength steel can obtain high strength while maintaining good low temperature performance.

In order to easily and economically perform hot or cold processing to make various parts of engineering structures, the low alloy high strength steel must have appropriate forming properties. Like HARDOX 500 steel yield strength, carbon structural steel, low alloy high strength steel can generally be processed in such way, as well as cutting, punching, and machining. Although the yield point of low alloy high strength steel is high, even if the forming operation is deformed quite severely, cold bending presses, drawing machines, presses and other equipment used for carbon structural steel forming can also be used for low alloy high strength steel, but some equipment needs to be modified.

The company formulates clear service process and service standard. To do a good job in after-sales service, first of all, clear service process and service standards should be formulated to let employees know which procedures to perform and which service standards to abide by.