nm450 mechanical properties Heavy Plate Available

The weldability of NM450 mechanical properties is good. It means that under certain process and construction conditions, NM450 mechanical properties can obtain good performance after welding. Weldability is a measure of the hot workability of steel. Weldability can be divided into weldability in construction and weldability in use. Weldability in construction refers to the sensitivity of cracking in weld metal and near seam zone, and hardening sensitivity of steel in near seam zone. Good weldability means that under certain welding process conditions, the weld metal and steel near the seam do not produce cracks. Weldability in use means that the mechanical properties of weld and HAZ steel are not lower than those of base metal.

In the past, NM450 mechanical properties, NM360 wear-resistant steel plates generally do not add tungsten. However, after adding the alloying element tungsten, the carbides distributed along the grain boundaries are greatly reduced, the acicular carbides in the crystal disappear, and there are a large number of granular carbides in the crystal. Tungsten reduces the precipitation of carbides and is spherically dispersed in the austenite crystals, which is beneficial to improve the strength and toughness of the NM360 wear-resistant steel plate.

NM450 mechanical properties 2020 stock in Tianjin: 7*2920*8200, 32*3000*7440, 14*2150*9300, 16*2200*10000, 12.5*2900*11000, 7*2920*8200, 14*1950*11000, 80*2200*10000, 16*2230*7650, 7*2920*8780, 32*2900*9700, 20*1950*9550, 10*2200*7200, 23.1*2590*7790, 20*1400*11400, 20*1950*9700, 7*2920*8780, 20.9*2851*7000, 25*1600*9300, 30*2200*9000, 14*1950*10550, 30*1600*8600.