nm400 material suppliers with certificates
The company now has NM400 material oversea market department, sales and supply department, finance department, logistics department, technical equipment department, quality management department, production department and other departments. The staff with college degree or above accounted for more than 80%, and there were more than NM400 material 30 professional and technical personnel. The LSAW pipe production line can produce welded pipes with Φ350-1800mm, wall thickness 6-80mm, and length 2-12m.
The seamless steel pipe for general use is rolled by common carbon structural steel, NM400 material, low alloy structural steel or alloy structural steel, with the largest output. It is mainly used as the pipe or structural part for conveying fluid. According to different uses, it can be divided into three categories: a according to chemical composition and mechanical properties; B according to mechanical properties; C according to hydrostatic test. If the steel pipe supplied according to class AB is used to accept liquid pressure, hydrostatic test shall also be carried out. The seamless pipes for special purposes include seamless pipes for boiler, chemical power, geological and petroleum, etc.
42CrMo steel plate is an ultra-high strength steel plate, which is widely used in machinery manufacturing steel. The steel is suitable for manufacturing large and medium-sized plastic molds that require certain strength and toughness. 42CrMo steel has high strength and toughness, good hardenability, no obvious temper brittleness, high fatigue limit and multiple impact resistance after quenching and tempering, and good low temperature impact toughness.
Hot-rolled steel sheet / cold-rolled steel sheet: Steel ingots or slabs are difficult to deform at normal temperature and difficult to process. They need to be heated to 1100 ° C to 1250 ° C for rolling. This NM400 material rolling process is called hot rolling. Rolling at room temperature is generally understood as cold rolling. However, from the point of view of metallurgy, the boundary between hot rolling and cold rolling should be distinguished by the temperature of metal recrystallization, that is, rolling below the recrystallization temperature is cold rolling; Rolling above the recrystallization temperature is hot rolling.
NM400 material, Q460D quenched and tempered steel plate spot specification: 6*2000*8500, 6*2000*10800, 45*1550*4900, 16*2000*9700, 14*1950*7030, 22.23*2181*12200, 28*2010*7300, 23.83*2179*5000, 19*2500*6000, 23.83*2179*5000, 28.58*2171*12300, 28.5*2340*12150, 28.58*2171*11500, 28.58*2171*10800, 22.23*2150*12200, 28.5*2000*12150, 28.58*2172*11500, 28.58*2172*10800, 28.58*2172*12100, 25.4*2298*13000 (mm).
The company is deeply supported and loved by customers with its unique business philosophy and business model. The company has always been adhering to the "credibility first, integrity-based, quality first" purpose, and sincerely serve new and old customers. Over the past twenty years, the company has won the trust of customers by relying on good service and good reputation. Our aftersales team’s main responsibility is to deal with quality feedback and complaints from Customer.
