igh quality nm500 sheet price mild steel plate

Based on the principle of win-win and mutual benefit, the company operates in good faith, strictly controls the quality, and provides perfect after-sales service, which has won unanimous praise. The success of the company is not only the igh quality NM500 sheet hard work and wisdom of the company's employees, but also the deep love of the majority of consumers. It also inspires all employees of the company to have the courage to strive. We will continue to innovate and leap forward, create greater brilliance of the enterprise, and make our own contribution to the development of the igh quality NM500 sheet steel industry.

15CrMo alloy plate is a heat-resistant steel with pearlite structure, which has high thermal strength (δb≥440MPa) and oxidation resistance at high temperatures, and has a certain resistance to hydrogen corrosion. Due to the high content of Cr, C and other alloying elements in steel, the hardening tendency of igh quality NM500 sheet and 15CrMo alloy plate is obvious and the weldability is poor. After welding, local high temperature tempering treatment should be carried out. The heat treatment process of 15CrMo alloy plate is as follows: the temperature rise rate is 200°C/h, the temperature is raised to 715°C for 1 hour and 15 minutes, the temperature drop rate is 100°C/h, and the temperature is reduced to 300°C before air cooling.

40Cr steel plate is one of the most widely used steel in machinery manufacturing. After tempering, it has good comprehensive mechanical properties, good low temperature impact toughness and low notch sensitivity. The hardenability of steel igh quality NM500 sheet is good. It can be hardened to Ф28 ～ 60mm during water quenching and Ф15～40mm during oil quenching. When the hardness is HB174～229, the relative cutting workability is 60%. The steel is suitable for making medium-sized plastic molds.

Hot rolled igh quality NM500 sheet steel coil and plates are among our main products. Hot rolling can significantly reduce energy consumption and cost. During hot rolling, the metal has high plasticity and low deformation resistance, which greatly reduces the energy consumption of metal deformation. Hot rolling can improve the igh quality NM500 sheet processing properties of metals and alloys, that is, the coarse grains in the casting state are broken, cracks are obviously healed, casting defects are reduced or eliminated, the as cast structure is transformed into deformed structure, and the processing properties of alloys are improved.

igh quality NM500 sheet, 12Cr1MoV steel is alloy structure steels, and it is usually produced into 12Cr1MoV steel coil, 12Cr1MoV steel sheet, 12Cr1MoV steel plate, 12Cr1MoV steel bar, etc. 12Cr1MoV steel is composed of Carbon, Silicon, Manganese, Chrome, Molybdenum and so on chemical elements. Amng them, the C content is 0.08-0.15, Si 0.17-0.37, Mn 0.40-0.70, Cr 0.90-1.20, Mo 0.25-0.35. The tensile strength of 12Cr1MoV steel is not lower than 490 Mpa, and yield strength is not lower than 245 Mpa.

Responsibilities: dealing with quality feedback and complaints from Customer.Bebon has the after sale service department, which is responsible to solve the problem of technical support and quality, service complaints. You can also contact the company customers service online if you have any problem when you receive the products. The responsibility is to deal with quality feedback and complaints from Customer. Welcome to come and visit our company office.