hardox 500 abrasion resistant carbon steel hr plates 2020.10.28

The development HARDOX 500 abrasion resistant of the company comes from the resource advantage, service advantage, logistics advantage and brand advantage established over the years, and it is also inseparable from the full support of new and old customers. We will uphold the support of all sectors of society, actively provide users with HARDOX 500 abrasion resistant high-quality and efficient services, work together for win-win, and create a better tomorrow!

The company can provide the dimensions, shape, weight, technical requirements, test methods, inspection rules, packaging, markings and quality certificates of high-quality carbon structural steel hot-rolled steel plates and strips. Carbon and alloy steel grades 15Cr, 20Cr, HARDOX 500 abrasion resistant, 30Cr, 35Cr, 40Cr, 45Cr, 50Cr, 38CrSi, 12CrMo, 15CrMo, 20CrMo, 25CrMo, 30CrMo, 35CrMo, 42CrMo, 50CrMo, 12CrMoV, 35CrMoV, 12Cr1MoV, 25Cr2Mo1V, 38CrMoA1, 40CrV, 50CrV , 15CrMn, 20CrMn.

Advantages of NM360 wear-resistant steel plate: NM360 steel has high strength: generally its yield strength is above 300MPa. 2. High toughness: The elongation is required to be 15% -20%, and the room temperature impact toughness is greater than 600kJ / m ~ 800kJ / m. For large welded components, high fracture toughness is also required. 3. NM360 steel plate has good welding performance and cold forming performance. 4. Low cold and brittle transition temperature.

Converter steelmaking: The furnace body of the converter can be rotated, and the steel plate is used as the outer shell, and the refractory is used as the inner lining. Converter HARDOX 500 abrasion resistant steelmaking does not require additional heating, because the molten iron is inherently high temperature, and it still continues to generate thermal oxidation reactions (from silicon, carbon and oxygen in molten iron).Because no more fuel is needed for heating, energy consumption is reduced.

Our alloy steel plate and sheets are mainly used for weld fabrication of pressure vessels that require improved notch toughness for lower than ambient temperature service.Width: 1000mm to 4500mmThickness : 5mm to 150mmLength: 3000mm to 18000mmImpact tested 52° CHARDOX 500 abrasion resistant, Supply Condition: As Rolled, Normalized Rolling, Furnace Normalizing, Vacuum Degassing, Simulated Post-Weld Heat Treatment or as per customer requirement.

Both parties shall confirm the HARDOX 500 abrasion resistant material object and the quality of the products, confirm the reasons for the defects and the quality of the products, and sign the quality inspection agreement. Major quality objections shall be reported to relevant leaders in a timely manner, and shall be discussed and solved with the HARDOX 500 abrasion resistant steel plant.