hardox 450 astm equivalent theoretical weight
The company attaches great importance to systematic management, and has passed the Hardox 450 astm equivalent ISO9001 quality management system, ISO14001 environmental management system, OHSAS18001 occupational health and safety management system, and ISO 9001: 2008 certification. Insist on Hardox 450 astm equivalent quality and promote brand development. The company's physical and chemical testing equipment is fully equipped and the quality management operation is standardized. Since 2002, the national, provincial, and municipal product quality inspection random inspection pass rates are all 100%.
At present, China's wear-resistant steel plate grades are divided into six levels, namely NM300, NM360, NM400, NM450, NM500, NM550 and NM600. The wear-resistant steel Hardox 450 astm equivalent grade adopts the combination of Chinese NM of wear resistance meaning and Brinell hardness (HB) value. For example: NM500, NM is the first universal parent of Chinese "wear resistance", "500" is Brinell hardness value. NM series wear-resistant steel has good wear resistance, which greatly reduces the loss and use cost.
Sprin steel refers to the special alloy steel used to manufacture all kinds of springs and other elastic elements. Hardox 450 astm equivalent, Spring steel has excellent comprehensive performance, good surface quality, accurate shape and size. The smelting of Hardox 450 astm equivalent, spring steel is very important. It is necessary to ensure excellent metallurgical quality, not only to ensure accurate chemical composition, but also to guarantee high purity. The content of sulfur, phosphorus, oxygen and nitrogen of spring steel should be low, and the uniformity and stability of spring steel should be good.
S355J2 steel plate Hardox 450 astm equivalent rolling process is controlled rolling process. In the rolling process, the ingot rolling temperature is 1000-1050℃; in the first stage, the low-speed and large reduction rolling process is adopted, the high-temperature stage is 950-1000℃, the rolling speed is 1.6-2.0m/s, the Hardox 450 astm equivalent single reduction rate is 15-20%, and the cumulative reduction rate is 40-45%, so as to ensure sufficient deformation of ingot. In the first stage, the start rolling temperature is 910-930℃, and the finish rolling temperature is ≤ 870℃.
A335 P22 steel pipe belongs to ferrite alloy steel nominal pipe for high temperature use. Chemical composition of A335 P22 steel pipe: C 0.10-0.20, Mn 0.30-0.80, P ≤ 0.025, S ≤ 0.025, Si 0.10-0.50, Mo 0.44-0.65. Mechanical properties of A335 P22 steel pipe: tensile strength 415mpa, yield strength 205 MPa. Hardox 450 astm equivalent, A335 P22 steel pipe is characterized by good process performance, less sensitivity to the heating temperature of heat treatment, good welding performance, good plasticity, and low strength, especially the high temperature rupture strength is lower than 12Cr1MoV steel. When used at the same temperature and stress, its wall thickness is about 30% thicker than 12Cr1MoV Steel.
After-sales service team is a key department to test the steel quality. Product quality is always the foundation of our survival and development. The company's full inspection from raw materials to finished products; and implements standardized, scientific, and strict internal quality control and management systems in accordance with the process flow during the production process; products can only leave the factory if qualified, and follow-up problem solving systems are implemented in after-sales services to guarantee the customers’ interest.
