hardox 400 sheet tensile strength automobile manufacturing steel plate
The company adopts modern management concept, adheres to “quality for survival, integrity for development”, and provides customers with high-quality and reliable HARDOX 400 sheet tensile strength steel products and wholehearted service. The company continuously deepens the internal reform of the enterprise, innovates in the reform, develops in the innovation, and gradually forms a set of management and operation mechanism which adapts to the market and has strong competitiveness.
HARDOX 400 sheet tensile strength, Q345B low alloy plate performance: 1) High strength: Generally its yield strength is above 300MPa; 2) High toughness: The elongation is required to be 15% to 20%, and the room temperature impact toughness is greater than 600kJ/m to 800kJ/m. For large welded components, higher fracture toughness is also required; 3) Good welding performance and cold forming performance; 4) Low cold brittle transition temperature; 5) Good corrosion resistance.
"A283C is same as A283 Gr C, A283 grade C. A283C plate technical parameters: A283C plate chemical composition - max. 0.24% carbon, max. 0.40% silicon, max. 0.90% manganese, max. 0.035% phosphorus, max. 0.040% sulphuric, and min. 0.20% Cu. A283C plate mechanical properties: min. yield strength is 205 MPa, tensile strength is 380-515MPa, min. elongation is 22% in 8"" and 25% in 2"". Tolerance of A283C plate is subject to ASTM A6. The density of HARDOX 400 sheet tensile strength, A283C plate is 7.85g/cm3."
When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.