hardox 400 density kg/m3 low alloy steel sheet

What material is P355GH? P355GH steel is used in petroleum, chemical, power station, boiler and other industries, used to make reactors, heat exchangers, separators, spherical tanks, oil and gas tanks, liquefied gas tanks, nuclear reactor pressure shells, boiler drums, liquefied petroleum gas cylinders, Equipment and components such as high-pressure water pipes of hydropower stations and turbine volutes.

20 # material is a high-quality low-carbon carbon steel, cold-extruded, carburized and hardened steel. HARDOX 400 density kg/m3, 20 # material has low strength, good toughness, plasticity and good weldability. Chemical composition of 20 # round steel bar: C: 0.17 ~ 0.23, Si: 0.17 ~ 0.37, Mn: 0.35 ~ 0.65, S: ≤0.035, P: ≤0.035, Cr: ≤0.25, Ni: ≤0.30, Cu: ≤0.25. 20# carbon steel mechanical properties: Shear strength 275 ~ 392MPa, Tensile strength is 253 ~ 500MPa, elongation min. 25%.

When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.