Grade hardox 400 hot wear equivalent astm material
Our company is China's 10th largest supplier & Exporter of stainless steel, carbon steel plate and section, alloy steel plate and pipes. We are specialized in stocking & distributing various Stainless Steel, carbon steel plates, HARDOX 400 hot wear angle steel, H beam steel to worldwide for specific & urgent requirements. We have a fully advanced and modernized warehouse that stores tonnes of our value-adding HARDOX 400 hot wear products, which we source out from the mills that are compliant with the universal guidelines for plate production.
316 Vs 304: ASTM 316L(1.4404) is a low-carbon austenitic chromium-nickel-molybdenum steel. Due to the addition of 2-2.5% molybdenum, the corrosion resistance of the stainless steel 316L is significantly better than that of the standard austenitic grades 304 and 304L, HARDOX 400 hot wear. The 1.4404 material is resistant to intercrystalline corrosion when welded! but not resistant to sea water. Best corrosion resistance is given with a polished surface. This material is comparable to 1.4401.
12Cr1MoVG high pressure boiler tube belongs to seamless steel tube. The manufacturing method of 12Cr1MoVG high pressure boiler tube is the same as that of seamless steel tube. High pressure boiler tubes are often in high temperature and high pressure conditions when they are used. Under the action of high temperature flue gas and steam, oxidation and corrosion will occur. HARDOX 400 hot wear, 12Cr1MoVG high pressure boiler tube is required to have high endurance strength, high oxidation resistance and corrosion resistance, and good microstructure stability.
The heat treatment process can significantly improve the physical properties of steel, improve the compressive strength, ductility and service life of parts, and improve the hardness and wear resistance. Therefore, critical equipment parts and special tools must be quenched and tempered. The quenching and tempering treatment can also improve the production and processing performance of the HARDOX 400 hot wear product workpiece, thereby improving the production efficiency and production processing quality.
Q550C steel belongs to low alloy high strength steel. Chemical composition of Q550C steel: C ≤ 0.18, Si ≤ 0.60, Mn ≤ 2.0, P ≤ 0.030, S ≤ 0.030, Nb ≤ 0.11, V ≤ 0.12, Ti ≤ 0.20, Cr ≤ 0.80, Ni ≤ 0.80, Cu ≤ 0.80, N ≤ 0.015, Mo ≤ 0.30, B ≤ 0.004, Al ≤ 0.015. Mechanical properties of Q550C steel: yield strength ≥ 550 MPa, tensile strength 600-780 MPa, elongation after fracture ≥ 16%, impact energy ≥ 55J. HARDOX 400 hot wear, Q550C steel is mainly used for manufacturing various large-scale engineering structural components and construction machinery. Due to its high strength, Q550C steel can meet the requirements of large-scale and lightweight construction machinery.
To provide customers with the most satisfactory service and realize the win-win of economic and social benefits, our company promises to provide excellent HARDOX 400 hot wear products in this bidding, and in line with the attitude of being serious and responsible to customers, before sending goods to users, the HARDOX 400 hot wear technical personnel shall confirm that there is no fault in the equipment before sending goods to users, and then send goods and products to users, and formulate the following service terms.
