Factory price hardox 450 specification manufacturer

The Hardox 450 specification processing performance is good. Due to the uniform control of steel plate performance, excellent performance coordination and good toughness guarantee, the steel plate bending processing, drilling, cutting and other mechanical processing properties are excellent. In addition, the surface of the Hardox 450 specification steel plate is smooth and beautiful by inhibiting and removing oxide scale from slab heating to rolling process and heat treatment in furnace without oxidation atmosphere.

Medium and heavy plate Hardox 450 specification inventory spot: 23*3190*9220, 23*2470*8400, 22.5*3050*7300, 23*3500*10800, 21*3500*8840, 22*3400*11550, 29.5*1750*7150, 25*2500*12000, 27*1500*5000, 36*2720*7950, 27*1920*6000, 25*2630*3300, 26*3480*6000, 27*1800*6000, 23*2430*12370, 22.5*2560*6000, 43.5*1600*6000, 28.5*2500*6700, 32*1850*6000, 27.5*3100*6390, 48.5*1600*6000, 23.5*3300*14000, 33*3500*7050, 50*1600*6000.

Hot-rolled steel sheet / cold-rolled steel sheet: Steel ingots or slabs are difficult to deform at normal temperature and difficult to process. They need to be heated to 1100 ° C to 1250 ° C for rolling. This Hardox 450 specification rolling process is called hot rolling. Rolling at room temperature is generally understood as cold rolling. However, from the point of view of metallurgy, the boundary between hot rolling and cold rolling should be distinguished by the temperature of metal recrystallization, that is, rolling below the recrystallization temperature is cold rolling; Rolling above the recrystallization temperature is hot rolling.

The steel such as Hardox 450 specification delivered in the hot-rolled state has a certain degree of corrosion resistance due to the high temperature, so it can be stored in the open air. However, this layer of oxide scale also makes the hot-rolled steel surface rough and the size fluctuates greatly. Therefore, the steel with smooth surface, accurate size and good mechanical properties is required to be produced by using hot-rolled semi-finished products or finished products as raw materials and then cold rolling.