Export NM450 plate material Pressure Vessel Plate

After quenching and tempering, the 40Cr alloy steel plate has good comprehensive mechanical properties, good low-temperature impact toughness and low notch sensitivity. The hardenability of steel is good. It can be hardened to Ф28～60mm in water quenching and Ф15～40mm in oil quenching. In addition to quenching and tempering, 40cr sheet is also suitable for cyanidation and high-frequency quenching.

X56 steel plate is a kind of steel mainly used for large-diameter pipelines. API X56 steel plate is used to manufacture buried pipelines for natural gas transmission. Due to the corrosion of soil, serious degradation will occur. The corrosion type of X56 steel plate that can be produced is usually general corrosion and pitting. we are API 5L X56 steel suppliers ,we also can supply API 5L X52,API 5L X60,API 5L X65,API 5L X70,API 5L X80,please contact us if you need.

Titanium microalloying is an element of NM450 plate material strengthening complex with carbon and nitrogen. The addition of micro amount of titanium in the steel can fix almost all nitrogen and part carbon in the steel, so as to eliminate the strain aging phenomenon and improve the aging impact performance of the steel. At the same time, it can refine the grains and change the morphology of the compounds. According to the atomic weight ratio of Ti and N in NM450 plate material tin formula (Ti = 3.4n), the content of Ti in steel should be controlled between 0.015 and 0.025%. Generally, the amount of ferrotitanium added to each ton of steel is 1kg.

The automobile steel coil and sheets are one of our main steel materials exported to the overseas. For any questions about automobile steel, for example, JIS G3113 SAPH440 NM450 plate material chemical & mechanical composition, S355MC material specification, S700MC material properties, QSTE 380 TM equivalent, please contact us freely. Our sales person and technician will give you professional answers. And welcome to consult us about automobile steel price.

When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.