BBN STEEL raex 500 vs hardox 500 exported to Iran

The difference between raex 500 vs HARDOX 500, hot rolled sheet and cold rolled sheet: hot rolled sheet has low hardness, easy processing and good ductility. The cold-rolled sheet has high hardness and relatively difficult processing, but it is not easy to deform and has high strength. The cold rolled sheet is mostly used in automobile manufacturing and electrical products. Therefore, the two have their own characteristics. According to these characteristics, it is more appropriate to choose the right rolled plate to maximize its effect and benefit.

The thickness of the wear-resistant layer is uniform and the surface is smooth. The flatness of the whole wear-resistant steel plate is equivalent to that of the ordinary carbon steel plate, raex 500 vs HARDOX 500. There is a stress release crack on the surface of the wear-resistant layer, which only exists in the hardfacing layer and does not extend into the matrix. The stress release crack can greatly reduce the residual stress and deformation of the matrix during the surfacing process, thus avoiding the reduction of the matrix strength and not affecting the service performance of the wear-resistant steel plate.

raex 500 vs HARDOX 500 hot rolled products 2020 online stock: 16*2200*8000, 16*2000*10713, 20*2100*11600, 20*2150*10000, 25*1950*10150, 25*1950*9700, 30*2010*9500, 15*2500*10000, 50*2450*4800, 28*2170*13000, 60*2600*12150, 25*2400*8200, 40*2950*7100, 70*2270*7350, 70*2270*7600, 70*2500*12000, 75*2390*4320, 80*2200*10000, 88*3440*9200, 100*1770*6650.