Application and performance of raex 500 vs hardox 500

The company adheres to the raex 500 vs HARDOX 500 business tenet of "integrity casting strength, cooperation creating win-win", takes value-added service of supply chain as the tenet, and under the premise of existing market, bulk trade, logistics distribution and other advantages, develops a new comprehensive steel industry model combined with informatization. And will continue to provide customers with high-quality steel products and good service. We sincerely welcome new and old customers to join hands with our company raex 500 vs HARDOX 500 and seek common development!

After adding phosphorus, copper, chromium, nickel and other trace elements to the steel, a dense and highly adherent protective film is formed on the surface of the steel, which hinders the spread and development of rust and protects the substrate under the rust layer to slow down its corrosion rate. The amorphous spinel-type oxide layer with a thickness of about 50μm-100μm formed between the rust layer and the substrate is dense and has good adhesion to the substrate metal.

Difference between Q345R boiler vessel plate and ordinary Q345 plate, raex 500 vs HARDOX 500:Q345R boiler vessel plate is pressure vessel steel, Q345 plate is low alloy steel.Q345R boiler vessel plate generally requires flaw detection and positive deviation, while Q345 plate generally has lower requirements.In terms of performance, Q345R boiler vessel plate and Q345 plate are of the same level. However, due to high requirements, they can not be mixed in general.Generally, the requirement of Q345R boiler vessel plate is higher than Q345 plate, raex 500 vs HARDOX 500.

Quenching is a heat treatment process in which steel parts are heated to above the critical temperature, and after proper heat preservation, the parts are quickly cooled to room temperature in water or oil, so that martensite transformation occurs. The hardness of the quenched raex 500 vs HARDOX 500 increases sharply. Quenching is to prepare the organization for adjusting and improving the performance of raex 500 vs HARDOX 500 during tempering, while tempering determines the performance and life of the workpiece.

raex 500 vs HARDOX 500, P355GH plate mechanical properties: P355GH steel plate thickness/mm:> 60-100: tensile strength σb / MPa: 490-630; yield strength σx / MPa:> = 315 Impact absorption energy AKv / J:> = 34. Steel plate thickness / mm:> 100-150: tensile strength σb / MPa: 480-630,y ield strength σx / MPa:> = 295 Impact absorption energy AKv / J:> = 34. Chemical composition % (C:0.10-0.22, Si:<=03.60, Mn:1.00-1.70, Nb:<=0.010, Ti:<=0.03 S:<=0.030, P:<=0.025, Cr:<=0.30, Ni:<=0.30, Cu:<=0.30, Mo:<=0.10, V <=0.02)

We should focus on the main problems to be solved and pay attention to efficiency. After receiving the user's quality objection report data, the possible causes, responsible units, compensation amount, etc. of the problem shall be judged based on experience. To have a clear service plan, to be clear about what your main problem is, what technical support is needed, these should be prepared.