10mm-500mm thickness nm450 steel density welding process
After comprehensive and professional training such as customer service, the customer service team has more strict discipline in the management of customer service team to ensure that customer service personnel respond to customers with a professional attitude. A process supervision system has been set up to let each customer supervise the process of the system with us
Continuous rolled steel plates and single rolled steel plates NM450 steel density are often used in many industries. Although the appearance of these two steel plates is very similar and they are same steel grades, in some respects, they belong to two different plates. Because the continuous rolled steel plate is made of strip steel by uncoiling, leveling and shearing, its NM450 steel density comprehensive mechanical properties are not as good as the single rolled steel plate, so some important occasions would choose single rolled steel plate but not continuous rolled steel plate.
NM450 steel density, 13CrMo44 steel plate is a kind of steel which with Cr, Mo,Cr-Mo and mainly used for pressure vessels. The steel grade 13CrMo44 is according to DIN 17155 standard which with the yield strength of 242MPa. The DIN 17155 13CrMo44 steel plate chemical composition is the content of C is 0.15, Mn is 2.00, S is 0.03, Cu is 0.30, Si is 1.00, P is 0.045, Cr is 17 or 19 and the Ni is 8 or 10.
We have 4 typical production lines, which can produce hot rolled Seamless, LSAW, ERW and SSAW pipes. SSAW pipe production line range is OD 219.1mm-3500mm, wall thickness 3.2mm-25.4mm. Product NM450 steel density annual capacity is 200 thousand tons.
After the order is finished, our after-sales service center will send an email to make a feedback about our steel products' quality. We have phone service every three months to remind our customers of the possible problems and collect advices or suggestions in quality and service. Upon the collection of advices or suggestions, our after-sales service will quickly make technical solutions to wipe out the customer problem.
Our company has been established for 20 years and has accumulated rich experience in steel products. At the same time, it is often exported to Southeast Asia, Africa, South America and other countries. So you can rest assured that our NM450 steel density products and our prices are very favorable. Because we have our own factory, there is no other cost, we can also carry out machining and so on.
