100mm Thick Steel Asme hardox 450 steel wear resistance Spot

Carbon steel Hardox 450 steel wear resistance is an iron carbon alloy with carbon content less than 2.11% and a small amount of silicon, manganese, sulfur, phosphorus and other impurities. Carbon steel inevitably contains some impurity elements during smelting, which has a great influence on the performance and quality of steel, so it should be controlled. The quality of carbon steel is mainly measured by the content of sulfur and phosphorus. The lower the Hardox 450 steel wear resistance content of sulfur and phosphorus, the better the quality of carbon steel.

Over the years, the company has established a standard of Hardox 450 steel wear resistance steel products pre-sale, in sale and after-sale service, which meets customers' needs in all aspects and in the whole process, so that our products and services are deeply trusted by customers, and has established a long-term cooperation and mutual benefit relationship with customers. The company adheres to Hardox 450 steel wear resistance quality surpervision, comprehensively implements quality management, strictly controls the whole process of product from contract signing to after-sales service.

X-rays or γ-rays are projected on the surface of the steel plate, and rubber can be placed on the other side of the steel plate. Since the radiation propagates through the steel plate and is absorbed, the intensity is different due to the presence or absence of defects, so the film can record the shape and position of the defects. This Hardox 450 steel wear resistance method is sensitive to the detection of common steel plate defects such as slag inclusions, porosity and pores. The disadvantage is that it is difficult to find the specific depth of the defect and it is not easy to find cracks.

The strengthening mechanisms in metals mainly include solid solution strengthening, dislocation strengthening, fine grain strengthening, and second phase (precipitation and dispersion) strengthening. Alloying elements have the most significant strengthening effect on steel in the quenched and tempered state, because it makes full use of all four strengthening mechanisms. Martensite is formed during quenching, and carbides are precipitated during tempering, resulting in a strong second phase strengthening and greatly improving toughness. Therefore, obtaining martensite and tempering it is the most economical and effective comprehensive strengthening method for Hardox 450 steel wear resistance.

We should focus on the main problems to be solved and pay attention to efficiency. After receiving the user's quality objection report data, the possible causes, responsible units, compensation amount, etc. of the problem shall be judged based on experience. To have a clear service plan, to be clear about what your main problem is, what technical support is needed, these should be prepared.