Whether nm500 gb standard sheet need preheating

Since it was established in 2000. Based on the domestic rich NM500 gb standard sheet product resources and the great steel demand of the international market, our NM500 gb standard sheet service has already spread many countries in Europe , America, Southeast Asia, Middle East, South America, Africa, etc, and we have won an outstanding reputation for its professional exporting steel products

20# steel plate is a high-quality low-carbon carbon steel plate, cold extruded, carburized and hardened steel. NM500 gb standard sheet, 20# steel has low strength, good toughness, plasticity and weldability. The tensile strength is 253-500MPa, and the elongation is ≥24%. 20# steel performance is basically similar to 15# steel, but the strength is slightly higher. The cold-drawing or normalizing state of the cutting process is better than the annealing state. 20# steel is used to manufacture various mechanical parts with high toughness under hot rolling or normalizing state, which require high toughness.

Our company provides NM500 gb standard sheet, A302 gr. B boiler plate for customers all over the world, which is used for pressure vessels, boilers, tanks and heat exchangers in oil and gas projects. The boiler steel plate of ASTM A302 grade B /A302 gr. B can be rolled with a maximum thickness of 300 mm, and the steel performance, including mechanical properties and chemical composition, can be guaranteed to fully comply with ASTM A302 / A302M standard.

Rolling steel is the process of pressing to change the shape of the ingot and billet between the rotating rolls. The so-called steel rolling process is a combination of a series of steel rolling processes. The entire rolling production process is always composed of the following NM500 gb standard sheet basic processes: ① billet preparation:Including the cleaning of surface defects, the removal of surface scale and the pre-heat treatment of billets. ② billet heating ③ steel rolling: it is the core of the entire rolling production process. ④ Finishing.

NM500 gb standard sheet, Q690 steel is low alloy high strength steel. It belongs to the Chinese GB standard steel. Q690 steel is named after its yield strength value. Q is the abbreviation of yield strength, that is, the yield strength of Q690 steel is 690 MPa. Chemical composition of Q690 steel: C ≤ 0.18, Si ≤ 0.60, Mn ≤ 2.0, P ≤ 0.030, S ≤ 0.025, Nb ≤ 0.11, V ≤ 0.12, Ti ≤ 0.20, Cr ≤ 1.00, Ni ≤ 0.80, Cu ≤ 0.80, N ≤ 0.015, Mo ≤ 0.30, B ≤ 0.004, Al ≤ 0.015. The mechanical properties of Q690 steel are: yield strength ≥ 690 MPa, tensile strength 730-940 MPa, elongation after fracture ≥ 14%, impact energy 31J.

Provide special product requirements to meet the personalized needs of customers. The NM500 gb standard sheet company arranges production and shipment strictly according to the contract, and guarantees to supply goods according to the time agreed in the contract. Provide professional consultation: we guarantee to answer any professional and NM500 gb standard sheet technical questions raised by users within 1 hour; provide detailed information.