Where to use hardox 400 mechanical properties

Quenching is a heat treatment process in which steel parts are heated to above the critical temperature, and after proper heat preservation, the parts are quickly cooled to room temperature in water or oil, so that martensite transformation occurs. The hardness of the quenched HARDOX 400 mechanical properties increases sharply. Quenching is to prepare the organization for adjusting and improving the performance of HARDOX 400 mechanical properties during tempering, while tempering determines the performance and life of the workpiece.

It has good toughness. By strictly controlling the chemical composition, reducing the content of HARDOX 400 mechanical properties harmful elements and selecting reasonable heat treatment conditions, NM360 steel plate has good toughness. Therefore, the highly reliable structural parts can be constructed according to the brittle failure of wear-resistant components. Uniform and beautiful quality, HARDOX 400 mechanical properties using advanced technology and equipment, combined with high and scientific technical management, the material and shape of the product are even and consistent.

Aspire to technological innovation and pursue first-class quality steel HARDOX 400 mechanical properties products.Take independent innovation as an important support for the sustainable development of iron and steel industry, strengthen the main position of technological innovation, accelerate the original innovation, integrated innovation, introduction, digestion, absorption and re innovation, improve the technological innovation system, and cultivate the core technology and brand products of independent intellectual property rights.

Normalizing is a heat treatment that improves the toughness of steel. After the steel components are heated to 30-50°C above the Ac3 temperature, they are kept for a period of time and then air cooled. The main feature is that the cooling rate is faster than annealing but lower than quenching. During normalizing, the crystal grains of the steel HARDOX 400 mechanical properties can be refined in a slightly faster cooling. Not only can satisfactory strength be obtained, but also the toughness (AKV value) can be significantly improved and reduced The tendency of the component to crack.