thickness of steel nm450 cold bending performance

The company adheres to the people-oriented concept and takes "learning, sharing, gratitude, integrity, respect and responsibility" as the enterprise values. Advanced equipment, scientific standardized management, strict quality assurance system and high-quality team are the core competitiveness of the company. The company will continue to provide customers with high-quality, timely and perfect steel products and services under the guidance of the mission of "striving for perfection to meet customer needs".thickness of steel NM450

Steel S275J0 is a carbon structural steel grade. Our mill can produce S275J0 carbon steel plates up to 400mm thickness. Generally speaking, as rolled condition for S275J0 carbon steel plate is Ok. Our mill would like to provide customers' normalized delivery condition if they indicate in their purchase order. thickness of steel NM450, Structural steel S275J0 has a specified minimum yield strength at ambient temperature of 275MPa when plates thickness less than 16mm.

Thickness of steel NM450,Main characteristics of 12Cr1MoV Steel: compared with 12CrMoV steel, 12Cr1MoV steel has higher oxidation resistance and thermal strength. The creep limit of 12Cr1MoV steel is very close to the endurance strength value, and it has high plasticity under the condition of endurance tension; the processability and weldability of 12Cr1MoV steel are good, but it needs to be preheated to 300 ℃ before welding, and stress removal treatment after welding. 12Cr1MoV steel is widely used in Superheater, header and main steam pipe of high pressure, ultra-high pressure and subcritical utility boiler.

Thickness of steel NM450,Converter steelmaking: The furnace body of the converter can be rotated, and the steel plate is used as the outer shell, and the refractory is used as the inner lining Converter steelmaking does not require additional heating, because the molten iron is inherently high temperature, and it still continues to generate thermal oxidation reactions (from silicon, carbon and oxygen in molten iron)Because no more fuel is needed for heating, energy consumption is reduced,thickness of steel NM450.

Heat treatment specification and microstructure of 12Cr1MoV alloy plate:Heat treatment specification: quenching 970 ℃, air cooling; tempering 750 ℃, air cooling. Microstructure: bainite + ferrite.Mechanical properties of 12Cr1MoV alloy plate:Tensile strength σb (MPa)：≥490(50); Yield strength σs (MPa)：≥245(25); Elongation δ5 (％)：≥22; area shrinkage ψ (%): ≥ 50; Impact energy Akv (J): ≥ 71; Impact toughness value αkv (J/cm2)：≥88(9).

Thickness of steel NM450,Through the operation and management, brand advantage and improve pre-sales, sale of after-sales service, the efforts of the company into the industry leading enterprises.Relying on perfect quality management system, it has built up competition predominance and provided high quality, favorable price and perfect after service for customers.thickness of steel NM450