The scratches of nm500 steel used for bridges

SA36 carbon structural steel is a material belonging to the ASME boiler and pressure vessels. The products are produced in steel plates, steel sheets, steel bars, and section steels. The tensile strength is 400-550MPa; the yield point is greater than or equal to 250MPa. SA-36 steel production process: the steel is killed steel. Detailed specifications: NM500 steel used for bridges thickness: 8-100mm, width: 1600-4020mm, length: 6000-17500mm. It is commonly used in the construction of bridges and buildings.

Alloy elements have the most significant strengthening effect on steel in quenched and tempered state. The primary purpose of adding alloying elements to steel is to improve the hardenability of steel and to ensure that martensite is easily obtained during quenching. The second is to improve the tempering stability of the steel to keep the martensite at a higher temperature, so that the carbides precipitated during the tempering of the quenched steel are finer, uniform and stable. In this way, under the same conditions, alloy steel has higher strength than carbon steel, NM500 steel used for bridges.

Steel production and rolling technology and equipment also pursue the continuity between processes, such as the continuous NM500 steel used for bridges process between continuous casting and rolling mills, continuous casting slabs hot transfer hot charging, increased direct rolling, and continuous cold rolling processes. The development of controlled rolling and controlled cooling technology that combines rolling and heat treatment has played a huge role in improving the properties of rolled materials.

After the order is finished, our after-sales service center will send an email to make a feedback about our steel products' quality. We have phone service every three months to remind our customers of the possible problems and collect advices or suggestions in quality and service. Upon the collection of advices or suggestions, our after-sales service will quickly make technical solutions to wipe out the customer problem.