The rolling process of хардокс 400 mechanical properties

BBN STEEL хардокс 400 mechanical properties 2020 newly inventory in Shanghai(500tons)16*1524*5900, 5*2800*12000, 15*2000*12000, 6*2500*12000, 10*2120*926012.5*1820*6096, 10*2900*7350, 24*2650*11100, 5*2800*12000, 8*2600*1000016*1524*5900, 8*2800*11230, 19*2910*11025, 32*2700*11025, 10*2270*711010*2120*9260, 65*2100*6000, 22.5*2910*11025, 12*2050*7780, 14*2050*90008*2600*10000, 10*2270*7110, 36*2140*9150, 40*2910*11000, 57*1600*6000

Many people will mix strip steel and steel plate together, which can usually be distinguished from the following points. First of all, the thickness of the steel plate is much thicker, and the thinner the strip steel is required, the better. Secondly, in appearance, the steel strip can be crimped and the steel plate is too thick to bend, even if it is bent, it is difficult to recover, because it is easy to break if it is bent too much. Thirdly, the strength of хардокс 400 mechanical properties, steel plate is higher than that of strip steel. The steel plate is suitable for construction engineering, while strip steel is only suitable for processing into hardware products.

Based on the principle of quality and respect for customers, BBNsteel maintains good cooperative relations with customers in home and abroad. With modern management, high-quality products, reasonable prices and comprehensive after-sales service, we provide our customers with high quality and low price хардокс 400 mechanical properties products.

Titanium microalloying is an element of хардокс 400 mechanical properties strengthening complex with carbon and nitrogen. The addition of micro amount of titanium in the steel can fix almost all nitrogen and part carbon in the steel, so as to eliminate the strain aging phenomenon and improve the aging impact performance of the steel. At the same time, it can refine the grains and change the morphology of the compounds. According to the atomic weight ratio of Ti and N in хардокс 400 mechanical properties tin formula (Ti = 3.4n), the content of Ti in steel should be controlled between 0.015 and 0.025%. Generally, the amount of ferrotitanium added to each ton of steel is 1kg.