Tensile strength of hardox 450 suppliers

As a leading Hardox 450 suppliers, S420NL hot rolled plates and sheets supplier, we can supply structural steel S420NL plates up to 250mm. It is often delivered in normalized or normalized rolled condition. When customers need doing the third party inspection for S420NL steel plates,our mill would issue the MTC under format EN10204 3.2, the third party can stamped and report the result on our original MTC when inspection is done completely.

Hardox 450 suppliers, Wear-resistant steel plates are easy to overheat, so pay attention to heating temperature and holding time. It is recommended to heat up to 820 degrees for proper insulation. Tempering temperature: 320 degrees, sufficient time. Hardness: 45-48HRC. Good performance. Salt bath NaCl:BaCl=3:7 can be heated at a temperature of 820, time is 30 seconds/mm (mm refers to the effective thickness of the part), oil cooling. Tempering temperature is 280, air furnace time is 2 hours, and nitrate furnace time is 30 minutes.

Since the welding process is often used in the fabrication and processing of steel structures, it is very important for low-alloy high-strength steels of such purpose to be welded using the arc welding process that is widely used in thin thickness plates and steel strips. Yes, the welding seam of the steel structure should have the required strength and toughness, so as to withstand the most unfavorable conditions for the intended use. At present, the development of Hardox 450 suppliers, low-alloy high-strength steels is carried out simultaneously with the development of various welding processes. Most low-alloy high-strength steels can be welded well.

We have a professional after-sales department to collect all information related to customers, so as to make relevant treatment in time according to the information, and file it; guide the user's product use methods and precautions; coordinate with the sales department, visit customers regularly, understand the customer's use and new requirements, and make a customer visit record; When communicating with customers, they should be enthusiastic and careful to understand the situation of product problems and put forward solutions