Supply heavy nm400 mechanical properties grade annealing

Normalizing is a heat treatment that improves the toughness of steel. After the steel components are heated to 30-50°C above the Ac3 temperature, they are kept for a period of time and then air cooled. The main feature is that the cooling rate is faster than annealing but lower than quenching. During normalizing, the crystal grains of the steel NM400 mechanical properties can be refined in a slightly faster cooling. Not only can satisfactory strength be obtained, but also the toughness (AKV value) can be significantly improved and reduced The tendency of the component to crack.

The fake and inferior NM400 mechanical properties, steel plates have no metallic luster and are light red or similar to pig iron for two reasons. 1. Its blank is adobe. 2. The rolling temperature of counterfeit and inferior materials is not standard, and their steel temperature is visually inspected. In this way, rolling cannot be carried out in the specified austenite area, and the performance of the steel plate will naturally not meet the standard.

The main reference for structural design of steel structure engineering is the static and dynamic characteristics of the steel used under various actions, such as elasticity, plasticity, strength, toughness, fatigue and other mechanical properties. Therefore, the NM400 mechanical properties and so on steel used in the construction of steel structure engineering will limit its strength, plasticity, impact toughness and weldability. Steel structure engineering requires high tensile strength and yield point of steel. High yield point can reduce the cross-section of the component, so as to reduce the weight, save steel and reduce the cost. High tensile strength can increase the safety of the structure.