raex 500 sheet mechanical properties HIC plate

Standing at a new historical starting point, we adapt to the requirements of supply side structural reform, adhere to the overall strategy of "innovation driven, quality leading, quality improving and efficiency increasing, transformation and development", and constantly improve the development concept and development level with a forward-looking vision and grand vision. Now we have been ranked the International leading steel materials supplier.

The boiler and pressure vessel steel plates are our main products. Our main conducted standards for boiler and pressure vessel steel plates are (ASME) ASTM (S)A202, (S)A203, (S)A204, (S)A285, (S)A299, (S)A302, (S)A387, (S)A515, (S)A516, (S)A517, raex 500 sheet mechanical properties, (S)A533, (S)A537, (S)A612, (S)A662, (S)A841, EN10028-2, EN10028-3, EN10028-5, EN10028-6, JIS G3115, JIS G3103, GB713, GB3531, DIN 17155, JIS G3116, GB6653, EN10120, etc. Our typical boiler and pressure vessel steel grades are A204 grade B, A516 grade 70, A537 class 1, A537 class 2, 16Mo3, Q245R,Q345R, etc.raex 500 sheet mechanical properties

Q345R steel plate is a special pressure vessel steel with a yield strength of 340 Mpa. raex 500 sheet mechanical properties, Q345R pressure vessel steel has good comprehensive mechanical and technological properties The content of phosphorus and sulfur of Q345R pressure vessel steel is slightly lower than that of Q345 (16Mn) steel, and the tensile strength and elongation requirements of Q345R pressure vessel steel are higher than those of Q345 (16Mn) steel, and the impact toughness of Q345R pressure vessel steel is also required Q345R pressure vessel steel is the most widely used Chinese pressure vessel steel,raex 500 sheet mechanical properties.

The blanking of the structural steel plate is first to find 90 degrees, and then use a tape measure and a powder line to draw the cutting range According to the thickness of the carbon steel plate plus the cutting allowance, drilling is required For the deep processing of structural steel sections or profiles: First use a square ruler or a curved ruler to find 90 degrees, and then use a square ruler or a ruler to cut the line and add the cutting margin to the hole,raex 500 sheet mechanical properties.

Raex 500 sheet mechanical properties,"A573 Grade 70 steel chemical composition(%)Carbon max. 0.28: Manganese: 0.85-1.20Phosphorus Max.: 0.03Sulfur Max.: 0.03Silicon: 0.15-0.40A573 Grade 70 steel mechanical propertiesTensile strength min. MPa: 290Yield strength min. MPa: 485Elongation % min. in 200mm : 18Elongation % min. in 50mm : 21"

Respect customers and treat each other sincerely. Customers are always right. Always remember that the user is the God of the enterprise, respect the customer, and accept the customer's opinion modestly is the guarantee of the long-term development of the enterprise. Adhere to this concept, so that the service and the product are the same, long-term.raex 500 sheet mechanical properties