nm550 steel wear resistance prices may be in strong shock operation next week

Vigorously develop circular economy: the company adheres to the development path of circular economy, realizes the efficient utilization of energy and NM550 steel wear resistance resources, implements "four closed circuits" for renewable gas, industrial water, solid waste and waste heat steam according to the reduction of resource consumption - reuse - recycling, vigorously promotes advanced technologies such as energy-saving new technologies, new processes, NM550 steel wear resistance new materials, and promotes the competition of enterprises Struggle.

The heat treatment hardness of DC53 mold steel is higher than that of SKD11, NM550 steel wear resistance, the high temperature is 520-530 ℃, and the high hardness can reach 62-63HRC after tempering. In terms of strength and wear resistance, mold steel DC53 exceeds SKD11 mold steel. The toughness is twice that of SKD11 die steel. The toughness of DC53 is more prominent in cold work die steel. Tools made with DC53 rarely crack and crack, greatly increasing the service life.

The surface quality of pickling coil is very good. Compared with ordinary hot-rolled plate, NM550 steel wear resistance, the surface quality of hot-rolled pickling coil is improved in addition to the oxide scale on the surface, which is convenient for welding, oiling and painting. The accuracy of pickling coil specification is high. After leveling, the shape of the plate changes to a certain extent, thus reducing the deviation of unevenness, improving the surface finish and enhancing the appearance effect of pickling coil.

"Mirror" refers to the surface state of NM550 steel wear resistance stainless steel, which is usually 8K in the industry. The common mirror stainless steel on the market is divided into 6K, 8K and 10K, which are general polishing, 6K, 8K fine grinding and 10K super fine grinding effect. The same thickness generally has no big difference, 10K mirror is brighter; the thicker the thickness, the better the effect, and the higher the processing cost.

T11 steel is a steel grade produced according to American Standard ASTM A213. T11 steel is used for boiler, superheater and heat exchanger tubes with minimum wall thickness. Chemical composition of ASTM A213 T11 steel: C 0.05-0.15, Si 0.50-1.00, Mn 0.30-0.60, P, S ≤ 0.025, Cr 1.00-1.50, Mo 0.44-0.65. Mechanical properties of ASTM A213 T11 steel: tensile strength ≥ 415 Mpa, yield strength ≥ 170 Mpa, elongation ≥ 30%. The main ASTM A213 steel pipe grades are A213 T11, A213 T12, A213 T22, NM550 steel wear resistance, etc.

First of all, we should establish a correct concept of after-sales service. Service concept is an important part of corporate culture and a long-term enterprise value concept. Our company's after-sales service embodies the concept of "customer first, sincere service for customers". As long as we are in the "sincere service for users" under the guidance of the idea, I believe we will get rich returns.