nm500 wear resistance property width＜600mm hot rolled tool steel

Our steel pipes include four major types which are seamless pipe, ERW pipe, LSAW pipe, SSAW pipe, NM500 wear resistance property. Seamless pipe supply scope is OD 10.3mm--965.2mm, wall thickness 1.0mm--60mm. The ERW pipes production range from OD 21.3mm--660mm, wall thickness 1.0mm--16mm. LSAW pipes can supply with OD 406mm--1524mm, wall thickness 6mm--50mm. SSAW pipes can produce maximum OD 3500mm, minimum OD 219.1mm, wall thickness 3.2--25.4mm.

10# seamless steel pipe chemical composition : C: 0.07-0.13, Si: 0.17-0.37, Mn: 0.35-0.65, Cr: 0.15, Ni: 0.30, Cu: 0.25. 10# seamless steel pipe mechanical properties: recommended heat treatment temperature: 930℃, tensile strength: 335 MPa, yield strength: 205 MPa, elongation: 31%, impact energy is not required. NM500 wear resistance property, 10# seamless steel pipe has high plasticity and toughness, no temper brittleness tendency, and good weldability. Its machinability under cold drawing or normalizing treatment is obviously improved. In cold state, 10# seamless steel pipe is easy to be extruded and molded, but its strength is low, and its hardenability is very poor.

We have strong strength of steel plate production, high-quality products, and low prices. Guarantee to thank the new and old customers for their trust with good products, excellent quality, low price and perfect service. The company provides customers with professional "one-stop" logistics services: warehousing, loading and unloading, and transporting. The perfect logistics management, facilities, network and guarantee system guarantee customers' worry-free delivery.

From the order to the delivery, there are three quality inspections to ensure that the qualified rate of finished products is more than 100%. We promise that every order will be tracked in a timely manner to ensure that customers can receive goods safely and constantly listen to their opinions and suggestions, reflect on our own problems, and let customers feel at ease. We have a large warehouse in Shanghai and Tianjin, which can provide customers with sufficient sources of supply.

We cooperated with the Peruvian government for many years. And supply them large diameter steel pipes and pipe fittings to support their Hydropower Station Projects. We do 100% UT, RT, Hydraulic test and so on tests for the NM500 wear resistance property steel pipes. And do PT, MT and so on tests for the pipe fittings. We published "Welding Procedure Qualification report" after production. And our mill will keep the test record in the documentary department for 5 years. If meet any problems in following application, we can check the test record easily and assist to solve problems at the first time.

For ASTM A573 Grade 70/A573 Gr.70 carbon manganese silicon steel plates, our company would issue the original mill test certificate NM500 wear resistance property EN 10204 3.1 for clients when arrange delivery, so that clients can trace the A573 Gr.70 plates origin easily.