nm500 steel chemical composition main useage

Turkey produced 8.97 million metric tons of crude steel in the first quarter, with a 9.6 percent increase from the same month of last year. Iran's crude NM500 steel chemical composition steel production in March amounted to 6.75 million mt. up by 13.2 percent year on year. The CIS registered a NM500 steel chemical composition crude steel output of 25.15 million mt. falling by 0.6 on year-on-year basis, with Russia producing 17.9 million mt, down by one percent, and Ukraine producing 5.32 million mt, falling by 3.4 percent, both on year-on-year basis.

We can process the steel materials according to your drawing. Or if you can not make drawing, please send us NM500 steel chemical composition specific data and requirements, our technical department can make design and drawing for you, and then confirm with your technician or engineer. If all is OK, our processing center will process the steel materials according to the drawing. So no matter what size and shapes you need, we can meet demands at the most time.

The heat treatment hardness of DC53 mold steel is higher than that of SKD11, NM500 steel chemical composition, the high temperature is 520-530 ℃, and the high hardness can reach 62-63HRC after tempering. In terms of strength and wear resistance, mold steel DC53 exceeds SKD11 mold steel. The toughness is twice that of SKD11 die steel. The toughness of DC53 is more prominent in cold work die steel. Tools made with DC53 rarely crack and crack, greatly increasing the service life.

Q420C steel belongs to low alloy high strength steel. Q420 is named as the steel with yield strength of 420MPa, C means the impact temperature is 0 ℃, and Q is the abbreviation of yield strength. Chemical composition of Q420C steel: C ≤ 0.20, Si ≤ 0.50, Mn ≤ 1.70, P ≤ 0.035, S ≤ 0.035, Nb ≤ 0.07, V ≤ 0.20, Ti ≤ 0.20, Cr ≤ 0.30, Ni ≤ 0.80, Cu ≤ 0.30, N ≤ 0.015, Mo ≤ 0.20. The mechanical properties of Q420C steel are: yield strength ≥ 340 Mpa, tensile strength 500-680 Mpa, elongation after fracture ≥ 18%, impact energy 34J. NM500 steel chemical composition, Q420C steel has good mechanical properties and weldability, good cold and hot workability.

In 2014, we offered 175 ton Cold rolled stainless steel plate to Thailand. The NM500 steel chemical composition products are from TISCO. Here is the MTC that we offered to customer. We have our own quality team. Our quality team will inspect every order before shipment for customer. Normally, we will test the chemical composition, thickness, width, and length. Here are some pictures for last inspection.

As leading EN10025-6 S460QL structural steel plates supplier in China, our company has supplied hundreds of thousands tons S460QL steel plates to clients to assist them finish one after another NM500 steel chemical composition magnificent projects.