nm400 material specification steel scope range for ERW pipe

ASTM A633 material is particularly suited for service at low ambient temperatures and higher where notch toughness better than that expected in as-rolled material of a comparable strength level is desired. NM400 material specification, A633 Grade E high-strength low-alloy structural steel provides a minimum yield point of 60 ksi [415 MPa] in thicknesses up to 4.0 in. [100 mm], inclusive and 55 ksi [380 MPa] in thicknesses over 4 in. to 6 in. [100 to 150 mm], inclusive.

NM400 material specification, 35CrMo alloy steel is Chinese structual steel. As specified in GBT3077 standard, 35CrMo steel chemical composition should be: Carbon content 0.32-0.40 (C), Silicon content 0.17-0.37 (Si), Manganese content 0.40-0.70 (Mn), Chrome content 0.80-1.10 (Cr), Molybdenum content 0.15-0.25 (Mo). The heating temperature for 35CrMo alloy steel quenching is 850 Centigrade, the cooling material is oil. The heating temperature for 35CrMo alloy steel tempering is 550 Centigrade, the cooling material is oil or water.

Iron and steel goods, including pig iron, ingots, all kinds of steel and so on. Therefore, logistics companies are required to load evenly and evenly in the process of transportation, prevent moisture and prevent corrosion. It is necessary to prevent the NM400 material specification steel sheet from being mixed with water when transporting the steel; it is necessary to prevent the NM400 material specification steel from being mixed with water when transporting the steel; it is necessary to prevent the steel from being mixed with water when transporting the steel; it is necessary to prevent the steel from being mixed with water when transporting the steel; it is necessary to prevent the steel from being mixed with water when loading the NM400 material specification steel sheet on the truck Good luck.

The company's after-sales service tenet is "customer first, timely guarantee, enthusiastic service and effective work". In order to establish a set of perfect after-sales service system and strict management system, so that the after-sales service can be effectively guaranteed. The company has set up after-sales service department to ensure timely, unique and effective response to every user's request, coordinate internal resources internally, and put an end to all evasion and delay.

A West Africa customer 112000pcs ASTM A36 Screw Ribbons for project West Africa Gas Pipeline (WAGP) in 2017 year. A36 carbon steel’s strength, formability, and excellent welding properties make it suitable for a large variety of applications, including welding, fabricating, and bending. Our customer is satisfied with our carbon steel A36 Screw Ribbons. If you are interested in our steel machining parts, welcome to contact us.

Our company has strict quality control standards. If you want to visit our factory, you are welcome at any time! We produce a lot of steel products every month to export NM400 material specification to all over the world. Because our customers are from all countries, they will order a large number of steel products from our company every month.