nm300 plate chemical composition grade annealing
Our company will set up a full-time service engineer for the project, who is responsible for the interface and coordination of technical support and after-sales service of the nm300 plate chemical composition project. In response process of customer service center, in case of technical support and after-sales service demand, the user shall contact the full-time engineer of nm300 plate chemical composition customer service center, and the technical personnel will give corresponding answers and on-site treatment according to the needs of users.
15CrMo alloy plate is a heat-resistant steel with pearlite structure, which has high thermal strength (δb≥440MPa) and oxidation resistance at high temperatures, and has a certain resistance to hydrogen corrosion. Due to the high content of Cr, C and other alloying elements in steel, the hardening tendency of nm300 plate chemical composition and 15CrMo alloy plate is obvious and the weldability is poor. After welding, local high temperature tempering treatment should be carried out. The heat treatment process of 15CrMo alloy plate is as follows: the temperature rise rate is 200°C/h, the temperature is raised to 715°C for 1 hour and 15 minutes, the temperature drop rate is 100°C/h, and the temperature is reduced to 300°C before air cooling.
Q420C steel belongs to low alloy high strength steel. Q420 is named as the steel with yield strength of 420MPa, C means the impact temperature is 0 ℃, and Q is the abbreviation of yield strength. Chemical composition of Q420C steel: C ≤ 0.20, Si ≤ 0.50, Mn ≤ 1.70, P ≤ 0.035, S ≤ 0.035, Nb ≤ 0.07, V ≤ 0.20, Ti ≤ 0.20, Cr ≤ 0.30, Ni ≤ 0.80, Cu ≤ 0.30, N ≤ 0.015, Mo ≤ 0.20. The mechanical properties of Q420C steel are: yield strength ≥ 340 Mpa, tensile strength 500-680 Mpa, elongation after fracture ≥ 18%, impact energy 34J. nm300 plate chemical composition, Q420C steel has good mechanical properties and weldability, good cold and hot workability.
Our company provides nm300 plate chemical composition, A302 gr. B boiler plate for customers all over the world, which is used for pressure vessels, boilers, tanks and heat exchangers in oil and gas projects. The boiler steel plate of ASTM A302 grade B /A302 gr. B can be rolled with a maximum thickness of 300 mm, and the steel performance, including mechanical properties and chemical composition, can be guaranteed to fully comply with ASTM A302 / A302M standard.
Responsibilities: dealing with quality feedback and complaints from Customer.Bebon has the after sale service department, which is responsible to solve the problem of technical support and quality, service complaints. You can also contact the company customers service online if you have any problem when you receive the products. The responsibility is to deal with quality feedback and complaints from Customer. Welcome to come and visit our company office.
If you want to find wear resistant steel plates or abrasion resistant steel supplier and exporter in China, please visit us. We are one of the leading nm300 plate chemical composition wear resistant steel plates manufactures and stock keepers. We have large stocks for wear resistant steel plates of various grades and dimension. We can not only send offer at the first time, but can also provide technical support and give you professional suggestions and answers about NM400 nm300 plate chemical composition steel specifications, difference between HARDOX 400 and AR400 and so on question about wear resistant steel plates. Come on! Just call us or send email.
