Hot rolled 1500X6000mm size nm500 grade material specification

Based on the main business of iron and steel, we are committed to producing high-quality, green and efficient steel products. The main steel products are medium and NM500 grade material heavy plate, hot rolled coil, section steel, steel tube, etc., which are widely used in automobile, oil, railway, bridge, construction, electricity, transportation, machinery, shipbuilding and other important fields. Our steel products are exported NM500 grade material to Indonesia, Bangladesh, Myanmar, Iran, Brazil, Mexico, UAE, Iraq, etc Egypt, Mozambique, Ukraine and other dozens of countries and regions.

Many people will mix strip steel and steel plate together, which can usually be distinguished from the following points. First of all, the thickness of the steel plate is much thicker, and the thinner the strip steel is required, the better. Secondly, in appearance, the steel strip can be crimped and the steel plate is too thick to bend, even if it is bent, it is difficult to recover, because it is easy to break if it is bent too much. Thirdly, the strength of NM500 grade material, steel plate is higher than that of strip steel. The steel plate is suitable for construction engineering, while strip steel is only suitable for processing into hardware products.

Q345R material is a special steel grade for pressure vessels with a yield strength of 340MPa. It has good comprehensive mechanical properties and technological performance. The phosphorus and sulfur contents are slightly lower than the low-alloy high-strength steel plate Q345 (16Mn) steel. In addition to the increased tensile strength and elongation requirements compared to Q345 (16Mn) steel, it also requires impact toughness. Q345R steel plate is currently the most widely used and most used steel plate for pressure vessels in China.

Semi-endless rolling technology has three advantages: the NM500 grade material product's limit thickness and limit width specification range has been significantly expanded. The thinnest thickness of SPHC steel has been expanded from 1.0 mm to 0.78 mm, and the limit specification product width has been expanded from 1100 mm to 1300 mm; The thinnest thickness of Q235B steel has been expanded from 1.2 mm to 1.0 mm, and the width range of the limit specification products has also been further expanded.

Mild steel plate product NM500 grade material stock: 6*3120*5400, 6.5*1600*6000, 10*2900*9500, 7*2800*7200, 9*2400*8000, 7*2800*7000, 6*2850*4900, 10*2000*9870, 9*2000*7960, 6*1500*12000, 11*3100*9600, 7*3010*5550, 6*3320*6000, 12*1300*4000, 11*1720*4000, 11*1910*13350, 11*1510*6800, 6*3170*4700, 12*2660*5800, 11*1750*7270, 11*3000*9230, 11*1690*7500, 6.5*2750*12000, 11*2150*7740, 11*1750*7280, 11*3100*9400, 11*1750*7000.

After the order is finished, our after-sales service center will send an email to make a feedback about our steel products' quality. We have phone service every three months to remind our customers of the possible problems and collect advices or suggestions in quality and service. Upon the collection of advices or suggestions, our after-sales service will quickly make technical solutions to wipe out the customer problem.