High quality nm500 steel equivalent grades manufacture

The company has the industry's advanced automated production lines and precision laboratory instruments and a capable steel industry management team. Through scientific management, optimized technology, and rigorous testing, the company will keep the production efficiency and production quality at the leading level in the industry and continue to provide customers with high-quality NM500 steel equivalent grades products. At the same time, the company is committed to building a comprehensive steel manufacturing industry and strives to make the company leads new progress and development.

Welded steel pipe refers to the steel pipe with a joint on the surface which is welded after the steel strip or steel plate is bent and deformed into circular, square and other expected shapes. According to different welding methods, it can be divided into arc welded pipe, high frequency or low frequency resistance welded pipe, gas welded pipe, furnace welded pipe, Bondi pipe, NM500 steel equivalent grades, etc. According to the weld shape, it can be divided into straight welded pipe and spiral welded pipe. Electric welded steel pipes are mainly used in oil drilling and production, machinery manufacturing, etc.; furnace welded pipes can be used as water gas pipes, large-diameter straight seam welded pipes for high-pressure oil-gas transmission, etc.; spiral welded pipes are used for oil-gas transmission, pipe piles, piers, etc. Welded steel pipe has lower cost and higher production efficiency than seamless steel pipe.

Chemical composition of NM500 steel equivalent grades, Q345D steel plate: C: ≤0.18; Si: ≤0.50; Mn: ≤1.70; P: ≤0.030; S: ≤0.025; Nb: ≤0.07; V: ≤0.15; Ti: ≤0.20; Cr: ≤0.30; Ni: ≤0.50; Cu: ≤0.30; N: ≤0.012; Mo: ≤0.10; Als: ≥0.015. Yield strength (MPa) of Q345D steel plate: ≤16mm: ≥345; 16-40mm: ≥335; 40-63mm: ≥325; 63-80mm: ≥315; 80-100mm: ≥305; 100-150mm: ≥285; 150-200mm: ≥275; 200-250: ≥275; 250-400: ≥265. Tensile strength of Q345D low alloy steel: 450-630(MPa). Elongation: ≥21. Impact test: -20 ℃: ≥34.

Bridge steel plate is specially used for erecting railway or highway bridges. NM500 steel equivalent grades, bridge steel plate is required to have high strength and toughness to bear the load and impact of rolling stock, and have good fatigue resistance, certain low temperature toughness and atmospheric corrosion resistance. The bridge steel plate used for bolt welding bridge should also have good welding performance and low notch sensitivity.

The company focuses on two markets at home and abroad, and has a group of 56 experienced sales elites and professional and technical personnel. It can provide customers with drawing design, NM500 steel equivalent grades deep processing services and installation solutions. 20 years of project experience has provided high-quality carbon steel, alloy steel products and high-quality after-sales service to customers in many countries around the world. The company has won widespread praise from customers.

There is a silo technology R&D center in our company with many experts. Our technical backbones go abroad to study advanced technologies regularly to make our technology and products leading in the world. We provide our customers with NM500 steel equivalent grades high-quality steel plates, the excellent quality from specialty. With good reputation, high-quality products, strong strength, and low prices, we welcome the clients from the world to come to visit our factory.