hardox 500 machinability vs weather resistant steel plate
09CuPCrNi-A steel belongs to weathering steel. Through alloying of Cu, Mn, Si, Al and simply adjusting part of element content of ordinary low carbon steel (Q235 steel), economic weathering HARDOX 500 machinability steel with good atmospheric corrosion resistance and comprehensive mechanical properties can be produced without changing the production process of Q235 steel. 09CuPCrNi-A steel is mainly used for railway, vehicle, bridge, tower and other steel structures exposed to the atmosphere for a long time.
Focusing on the energy conservation and emission reduction objectives proposed by the municipal government, the company gives full play to the advantages of HARDOX 500 machinability circular economy formed after the comprehensive completion and operation, and vigorously promotes the implementation of energy conservation objectives. Through measures such as energy saving, technological innovation and HARDOX 500 machinability management strengthening, the energy saving target of annual reduction of added value energy consumption by 7%. It has made great contribution to energy saving of over completion.
Steel plate HARDOX 500 machinability cutting, according to different classification standards, there are different specific types. If it is divided by cutting temperature, it can be divided into cold cutting and hot cutting. One of the cold cutting, there are water jet cutting and abrasive cutting and so on, thermal cutting is flame cutting, plasma cutting and laser cutting. In addition, we also need to know that the high-grade thick HARDOX 500 machinability steel plate can be cut by flame, and its cutting is as simple as that of ordinary low-carbon and low-alloy steel, but we need to pay attention to it.
With the increase of temperature, the yield limit of HARDOX 500 machinability will decrease monotonically, but the tensile strength of HARDOX 500 machinability will rise to a high peak value at a certain temperature, and then decrease. This peak temperature is called the blue brittleness temperature of HARDOX 500 machinability. Near the blue brittleness temperature, the HARDOX 500 machinability strength increases and the plasticity decreases. The elongation and section shrinkage of HARDOX 500 machinability increase with the increase of temperature, but there is a low peak at the blue brittleness temperature. The blue brittleness temperature of low carbon steel ranges from 200 ℃ to 250 ℃. The blue brittleness of low alloy steel is not obvious as that of low carbon steel, and the blue brittleness temperature is higher.
If customers have any difficult problems during use of the steel materials, they can contact the company's after-sales service department to feedback the existing problems. The after-sales department will reply as soon as possible to ensure that each customer has a good after-sales experience. Under special circumstances, the after-sales service department will start the problem-solving process, and the engineers in charge of the area will quickly follow up to solve the problem.