hardox 500 equivalent astm H beams

HARDOX 500 equivalent astm,The company will also put Georgetown steelworks on "care and maintenance mode" and temporarily lay off or redeploy about 130 employees working at the steelworks and contractors while some maintenance employees will be on staff during the closure. It is stated that unemployment insurance and state-based unemployment support will be available immediately to workers affected by these changes.

We can process the steel materials according to your drawing. Or if you can not make drawing, please send us specific data and requirements, our technical department can make design and drawing for you, and then confirm with your technician or engineer. If all is OK, our processing center will process the steel materials according to the drawing. So no matter what size and shapes you need, we can meet demands at the most time.

The quality of carbon steel is distinguished by the amount of sulfur (s) and phosphorus (P) in the steel. When the sulfur content in carbon steel is not more than 0.050% and the phosphorus content is not more than 0.045%, it is ordinary carbon steel; when the sulfur content and phosphorus content in carbon steel are less than 0.040%, it is high-quality carbon steel; when the HARDOX 500 equivalent astm sulfur content in carbon steel is less than 0.030% and the phosphorus content is less than 0.035%, it is high-quality carbon steel.

HARDOX 500 equivalent astm,In 2018, one of our India customers visit Zhengzhou office building and work shop to discuss carbon steel Q235B grind plate technical request. They have strict surface and thickness tolerance, and they also request UT and MT for testing for Q235B grind plate. As a result, they purchase 179 tons as trial order for first cooperation. After using the gind plate, the India customer has good comment on our quality. Till now, we keep exporting around 100 tons per month as regularly.

For ASTM A573 Grade 70/A573 Gr.70 carbon manganese silicon steel plates, our company would issue the original mill test certificate EN 10204 3.1 for clients when arrange delivery, so that clients can trace the A573 Gr.70 plates origin easily.HARDOX 500 equivalent astm

HARDOX 500 equivalent astm,A588 Grade A steel plate is for high strength low alloy structural steel with 345Mpa minimum yield point to 100mm thickness."When propertly exposed to the atmosphere, A588 Grade A is suitable for many applications in the bare condition.A588 Grade Acould be produced in 200mm in our company.HARDOX 500 equivalent astm

"The production method of seamless steel pipe can be roughly divided into cross rolling method (menesmann method) and extrusion method. The cross rolling method (menesmann method) is to pierce the tube blank with the cross roll first, and then extend it with the rolling mill. This method is fast in production, but requires high machinability of tube blank. It is mainly suitable for producing carbon steel and low alloy steel tube.The extrusion method is to pierce the billet or ingot with a piercer, and then extrude it into a steel tube with an extruder. This method is less efficient than the cross rolling method and is suitable for the production of high-strength alloy steel tubes."

Firmly establish the "people-oriented, safe development" concept, strictly follow the safety production policy of "safety first, prevention first, comprehensive management", strengthen and improve the management and supervision of safety production in an all-round way, and strive to improve the controllability of safety management And effectiveness, cultivate safety culture, improve long-term safety production mechanism, and build a harmonious BEBON.