hardox 500 density elastic modulus
We have new significant HARDOX 500 density projects in Nigeria. It is about crude oil storage tanks. With the development of our steel materials business in the Africa those years, Nigeria has been an important market to us. And we have many HARDOX 500 density famous projects in local and also participated in a lot of governmental projects. This crude oil storage tanks project is a very big engineering, and lasts for years. This is the only initial stage. We are under negotiation about following installation and further demands etc. matters.
We can process the steel materials according to your drawing. Or if you can not make drawing, please send us HARDOX 500 density specific data and requirements, our technical department can make design and drawing for you, and then confirm with your technician or engineer. If all is OK, our processing center will process the steel materials according to the drawing. So no matter what size and shapes you need, we can meet demands at the most time.
The metal structure of 15CrMo steel is martensite. This material has good oxidation resistance at about 650℃, good thermal strength below 600 ℃, and good shock absorption and thermal conductivity. HARDOX 500 density, 15CrMo steel is widely used in steam turbines. However, this type of steel has a greater tendency to harden and has poor welding performance. GB/T 3077-2015 15CrMo plates are supplied with 5 to 70MM thick, can be set to roll futures.
10# seamless steel pipe chemical composition : C: 0.07-0.13, Si: 0.17-0.37, Mn: 0.35-0.65, Cr: 0.15, Ni: 0.30, Cu: 0.25. 10# seamless steel pipe mechanical properties: recommended heat treatment temperature: 930℃, tensile strength: 335 MPa, yield strength: 205 MPa, elongation: 31%, impact energy is not required. HARDOX 500 density, 10# seamless steel pipe has high plasticity and toughness, no temper brittleness tendency, and good weldability. Its machinability under cold drawing or normalizing treatment is obviously improved. In cold state, 10# seamless steel pipe is easy to be extruded and molded, but its strength is low, and its hardenability is very poor.
We have built solid cooperation with Myanmar Navy since 2015, starting from a try order about 412 tons LR AH36 shipbuilding steel plates. Myanmar navy builds frigate every year and book shipbuilding steel materials from us regularly. This time, the Myanmar navy’s local representative visit us and put another order about 2025 tons LR grade A steel plates. According to clients requirements, we arranged HARDOX 500 density SGS inspection for the LR grade A steel plates before shipping and send them inspection report.
BBN steel strictly control quality of our carbon steel plate, alloy steel plates and structural steel plates. For HARDOX 500 density ASTM A572 Grade 50 structural steel plate, Our Q/C Department will inspect dimension before shipment, making sure structural steel plate thickness tolerance and width, length tolerance are matchable to the HARDOX 500 density standard requirements. The company is a good ASTM A572 Grade 50 structural steel plate supplier in the globle market and the head is located in China. Welcome to send us inquiry and questions about structural steel plate.
