hardox 450 steel manufacturer 2000tons stock in Iran

EN10025-2 S355JR low alloy steel grade is equivalent to GB Q345B in Chinese standard. For the normal thickness, these two steel grades are both owned 345MPa yield strength. Plate S355JR+N indicates that the S355JR steel plate must be done Normalized heat treatment when rolling for improve the steel strength and weldability. Our mill would roll Hardox 450 steel manufacturer, S355JR alloy steel plate under as rolled or control rolled when customers' have not requested any heat treatment in their P/O.

"A283C is same as A283 Gr C, A283 grade C. A283C plate technical parameters: A283C plate chemical composition - max. 0.24% carbon, max. 0.40% silicon, max. 0.90% manganese, max. 0.035% phosphorus, max. 0.040% sulphuric, and min. 0.20% Cu. A283C plate mechanical properties: min. yield strength is 205 MPa, tensile strength is 380-515MPa, min. elongation is 22% in 8"" and 25% in 2"". Tolerance of A283C plate is subject to ASTM A6. The density of Hardox 450 steel manufacturer, A283C plate is 7.85g/cm3."

To provide customers with the most satisfactory service and realize the win-win of economic and social benefits, our company promises to provide excellent Hardox 450 steel manufacturer products in this bidding, and in line with the attitude of being serious and responsible to customers, before sending goods to users, the Hardox 450 steel manufacturer technical personnel shall confirm that there is no fault in the equipment before sending goods to users, and then send goods and products to users, and formulate the following service terms.