hardox 400 vs mild steel modulus of elasticity

Chrome-Moly low alloy steel HARDOX 400 vs mild steel series contains 0.5% - 9% Cr and 0.5% - 1% Mo and lower than 0.20% carbon. 40CrNiMoA, 4340 and SNCM439 are the low alloy chromoly steel materials from the different standards. 40CrNiMoA steel HARDOX 400 vs mild steel is a Chinese standard chromium-molybdenum high strength steel with good hardenability and toughness.

The steel plate and strip after hot rolling treatment are generally called hot rolled plate. Compared with other steel plate processing industries, HARDOX 400 vs mild steel, hot rolled plate has these characteristics. First, low hardness, easy processing. Compared with other steel needs special mechanical equipment, hot rolled plate is a very convenient for processing. Second, good ductility, not easy to break, good compression capacity, long service life. Third, the manufacturing process is simple, and the price and cost are relatively cheap compared with other steels.

The chemical composition of 20CrMo steel pipe is 0.17-0.24, Si: 0.17-0.37, Mn: 0.40-0.70, Cr: 0.80-1.10, Mo: 0.15-0.25. Mechanical properties of 20CrMo steel pipe: tensile strength 410 Mpa; yield strength: 265mpa; elongation after fracture: 24; reduction of area: 60; impact absorption energy: 110J. 20CrMo steel pipe belongs to alloy structure steel pipe, which has high thermal strength, good high-temperature strength, good machinability, medium cold bending plasticity, high hardenability and good welding performance at 500-520℃. HARDOX 400 vs mild steel, 20CrMo steel pipe is generally used in quenching and tempering state.

We should focus on the main problems to be solved and pay attention to efficiency. After receiving the user's quality objection report data, the possible causes, responsible units, compensation amount, etc. of the problem shall be judged based on experience. To have a clear service plan, to be clear about what your main problem is, what technical support is needed, these should be prepared.