hardox 400 suppliers material equivalent astm grade

HARDOX 400 suppliers, 45Mn2 steel is a kind of alloy structural steel. 45Mn2 steel is made of high-quality carbon structural steel with proper addition of manganese. 45Mn2 steel belongs to the medium carbon quenched and tempered steel in alloy structural steel. The parts made with 45Mn2 steel can obtain high strength and good toughness after quenching and tempering at high temperature. That is to say, 45Mn2 steel has good comprehensive mechanical properties and is often used to manufacture shafts, connecting rods, fasteners which bear large loads.

After hot extrusion, the grains of the alloy wear-resistant steel plate are significantly refined, dendrites and network structures are broken, and the grain size and the distribution of precipitated phases in the alloy are more uniform to generate Al2Y and Al3Y phases distributed within and along the grain boundaries , The hardness is significantly improved, the mechanical properties are significantly improved, the deformation strengthening effect is more significant, and the corrosion resistance of the HARDOX 400 suppliers, alloy wear-resistant steel plate is significantly improved.

During the construction of hot-dip HARDOX 400 suppliers galvanized pipe, the correct welding process shall be adopted, the inspection and acceptance shall be carried out in strict accordance with the specification, and the anti-corrosion treatment (zinc rich paint) shall be done timely after the welding is completed. It is feasible in the construction process of open and closed air conditioning system, which can improve the HARDOX 400 suppliers construction speed and the firmness of the pipe connection. Therefore, the hot-dip galvanized pipe can be welded and connected under the construction conditions and on the premise of relevant protection and anti-corrosion measures.

When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.