General characteristics of nm300 wear resistance sheet

The sulfur element (S element) comes from the ore and fuel coke of steelmaking. It is a harmful element in nm300 wear resistance sheet etc. steel. Sulfur exists in steel in the form of iron sulfide (FeS). FeS and Fe form a low melting point (985℃) compound. The hot working temperature of steel is generally above 1150 - 1200℃, so when the steel is hot working, the premature melting of FeS compound causes the workpiece to crack, which is called "hot brittleness". It reduces ductility and toughness of steel and causes cracks during forging and rolling. Sulfur is also detrimental to welding performance and reduces corrosion resistance.

ArcelorMittal said it was taking measures to cut its North American nm300 wear resistance sheet steel production in response to the weakening demand for downstream steel after the outbreak of covid-19, foreign media reported. It is reported that ArcelorMittal's plant in the port of Indiana is ready to shut down the No. 4 blast furnace.

The steel plate and strip after hot rolling treatment are generally called hot rolled plate. Compared with other steel plate processing industries, nm300 wear resistance sheet, hot rolled plate has these characteristics. First, low hardness, easy processing. Compared with other steel needs special mechanical equipment, hot rolled plate is a very convenient for processing. Second, good ductility, not easy to break, good compression capacity, long service life. Third, the manufacturing process is simple, and the price and cost are relatively cheap compared with other steels.