Export 15mm nm500 grade material factory price

Since it was established in 2000. Based on the domestic rich product resources and the great steel demand of the international market, our service has already spread many countries in Europe , America, Southeast Asia, Middle East, South America, Africa, etc, and we have won an outstanding reputation for its professional exporting steel productsNM500 grade material

Steel S275J0 is a carbon structural steel grade. Our mill can produce S275J0 carbon steel plates up to 400mm thickness. Generally speaking, as rolled condition for S275J0 carbon steel plate is Ok. Our mill would like to provide customers' normalized delivery condition if they indicate in their purchase order. NM500 grade material, Structural steel S275J0 has a specified minimum yield strength at ambient temperature of 275MPa when plates thickness less than 16mm.

Compared with carbon steel, alloy steel has higher strength, better heat resistance, better low temperature resistance, better corrosion resistance and other advantages. Some of its work environment can not be adapted by carbon steel. Therefore, alloy steel is a common and important material in pressure pipeline. Low alloy steel, NM500 grade material quenched and tempered steel, stainless steel, heat-resistant steel and low temperature steel are commonly used in pressure pipes.NM500 grade material

NM500 grade material,Tempering includes high temperature tempering, medium temperature tempering and low temperature tempering. Tempering means to reheat the quenched steel to a certain temperature and then cool it in a certain way. Tempering can reduce or eliminate the internal stress produced by quenching, reduce the hardness and strength, and improve the ductility or toughness of steel. After quenching, the workpiece should be tempered in time, and the required mechanical properties can be obtained through the combination of quenching and tempering.

20 # material is a high-quality low-carbon carbon steel, cold-extruded, carburized and hardened steel It has low strength, good toughness, plasticity and good weldability Chemical composition of 20 # round steel bar: C: 017 ~ 023, Si: 017 ~ 037, Mn: 035 ~ 065, S: ≤0035, P: ≤0035, Cr: ≤025, Ni: ≤030, Cu: ≤025 20# carbon steel mechanical properties: Shear strength 275 ~ 392MPa, Tensile strength is 253 ~ 500MPa, elongation min 25%,NM500 grade material.

First of all, we should establish a correct concept of after-sales service. Service concept is an important part of corporate culture and a long-term enterprise value concept. Our company's after-sales service embodies the concept of "customer first, sincere service for customers". As long as we are in the "sincere service for users" under the guidance of the idea, I believe we will get rich returns.NM500 grade material