BBN supply nm500 steel mechanical properties cold bending performance

The effect of nitrogen (N) on the properties of NM500 steel mechanical properties and so on steel is similar to that of carbon and phosphorus. With the increase of nitrogen content, the strength of steel can be significantly improved, especially the plasticity, especially toughness, and the weldability will be decreased, and the cold brittleness will be intensified. At the same time, aging tendency, cold brittleness and hot brittleness will be increased, which will damage the weldability and cold bending property of steel. Therefore, the nitrogen content in NM500 steel mechanical properties and so on steel should be reduced and limited as much as possible. Generally, nitrogen content should not be higher than 0.018%.

The riser is an indispensable equipment in the development of offshore oil and gas resources, mainly for drilling, conducting liquid, conducting mud and transporting oil and gas. Because steel catenary risers face complex service conditions such as surges, seabed clay, and ice loads, they need to have high fatigue strength, large plastic deformation capacity, and excellent fracture toughness. At present, China's first self-developed and designed 6-inch steel catenary riser was successfully laid on August 18 this year in the first deep-water self-operated large gas field Lingshui 17-2 project.

Based on the principle of win-win and mutual benefit, the company operates in good faith, strictly controls the quality, and provides perfect after-sales service, which has won unanimous praise. The success of the company is not only the NM500 steel mechanical properties hard work and wisdom of the company's employees, but also the deep love of the majority of consumers. It also inspires all employees of the company to have the courage to strive. We will continue to innovate and leap forward, create greater brilliance of the enterprise, and make our own contribution to the development of the NM500 steel mechanical properties steel industry.

NM500 steel mechanical properties, The wear-resistant composite plate is quenched once and tempered at low temperature. The quenching temperature is 820-850℃ or 780-810℃. If the strength of the core is required to be higher, it should be quenched at 820-850℃ with low carbon M at the core. If the surface hardness is required to be high, the grain size can be refined by quenching at 780-810℃. It is suitable for solid carburized carbon steel and low alloy hardfacing wear-resistant composite plate workpieces, and coarse grain steel carburized by gas and liquid.