Alloy carbon hardox 450 chemical composition used in construction

ST52-3 low alloy steel is equivalent to domestic brand Q345. St52-3 new material number: 1.0570, old material number: 1.0841. St52-3 takes its tensile strength and yield point as its main characteristics. Hardox 450 chemical composition products are generally used in the manufacture of various construction machinery, such as drilling rigs, electric shovels, electric wheel dump trucks, mining trucks, excavators, loaders, bulldozers, various cranes, coal mine hydraulic supports and other mechanical equipment used in mining and various engineering constructions And other structural parts.

Composition characteristics of low alloy structural steel, Hardox 450 chemical composition: (1) Low carbon: the carbon content of low alloy structural steel is less than 0.20% due to the high requirements of toughness, weldability and cold formability. (2) The alloy elements such as manganese are added. (3) The addition of Nb, Ti or V and other auxiliary elements: a small amount of Nb, Ti or V forms fine carbides or carbonitrides in the steel, which is beneficial to obtain fine ferrite grains and improve the strength and toughness of low alloy structural steel. In addition, adding a small amount of copper (≤ 0.4%) and phosphorus (about 0.1%) can improve the corrosion resistance. The addition of a small amount of rare earth elements can remove sulfur and gas, purify the steel, and improve the toughness and process performance of low alloy structural steel.

Normalizing is a special case of annealing, the effect is similar to annealing, but the microstructure obtained by normalizing is finer. For low or medium carbon steel, normalizing can improve hardness and machinability. For Hardox 450 chemical composition medium carbon steel and low alloy steel, normalizing can refine grain and uniform structure and reduce hardness. For high carbon steel and high alloy steel, normalizing can eliminate the network carbide produced by forging and improve the homogeneity of the preparation heat treatment structure.

After-sales service team is a key department to test the steel quality. Product quality is always the foundation of our survival and development. The company's full inspection from raw materials to finished products; and implements standardized, scientific, and strict internal quality control and management systems in accordance with the process flow during the production process; products can only leave the factory if qualified, and follow-up problem solving systems are implemented in after-sales services to guarantee the customers’ interest.