1/4 inch nm500 wear resistance property weight

NM500 wear resistance property surface cracks refer to the linear cracks on the surface of NM500 wear resistance property, which should generally be the same as the forging or rolling direction. Formation reason: it is mainly due to the hairline, hot crack and cold crack caused by surface over burning, decarburization, looseness, deformation and excessive internal stress during processing (forging, rolling, heat treatment, quenching and tempering), as well as the high content of sulfur and phosphorus impurities on the surface. Inspection method: NM500 wear resistance property surface cracks can be detected by naked eye observation, acid pickling, magnetic particle inspection, coloring inspection and metallographic method.

10CrMo9-10 seamless pipe implements European standard EN 10216-2. The chemical composition of 10CrMo9-10 seamless pipe: C 0.08-0.14, Si ≤ 0.50, Mn 0.30-0.70, P ≤ 0.025, S ≤ 0.020, Cr 2.00-2.50, Ni ≤ 0.30, Mo 0.90-1.10, Al ≤ 0.04, Cu ≤ 0.03. The mechanical properties of 10CrMo9-10 seamless pipe: tensile strength: 450-530 MPa, yield strength: ≥ 280 MPa, elongation: ≥ 22%, impact energy: ≥ 40J. NM500 wear resistance property, 10CrMo9-10 seamless pipe is a kind of high temperature and high pressure boiler steel, which is mainly used in the production of power station boiler, steam boiler equipment, pressure vessel, large pressure pipe, etc.

In particular, the EU imports a large amount of iron ore from central and South America and Oceania, which are mainly transported by sea. The perfect port infrastructure makes the port operation cost of EU iron ore raw materials import relatively low. However, the NM500 wear resistance property steel transportation between EU Member States is mainly railway transportation, and the EU member states have established a very developed railway network and railway information infrastructure.

Responsibilities: dealing with quality feedback and complaints from Customer.Bebon has the after sale service department, which is responsible to solve the problem of technical support and quality, service complaints. You can also contact the company customers service online if you have any problem when you receive the products. The responsibility is to deal with quality feedback and complaints from Customer. Welcome to come and visit our company office.

LSAW Pipe to Peru. In the beginning of 2014, Peru government released an international tender for one of the hydroelectric power plant. Finally they chose us as the contractor, we purchased the steel plate and then fabricate the NM500 wear resistance property steel plate into steel pipe, and then make the corrosion protect on the surface, we also supply the fitting with our steel plate, the total value of this order is about 2 million USD.

We are specialized in offering hot rolled ASTM A516 steel plate, which are used in various engineering applications and can be availed in various grades like carbon steel NM500 wear resistance property A516 Grade 60 steel plate , A516 Grade 65 steel plate, A516 Grade 70 boiler steel plate, ASTM A516 GRADE 60 plates Trippled Certified, ASTM A516 GRADE 60 Plates Dual Certified. Our boiler plates are available in the form of steel plate, steel sheet, steel sections. If you are interested in NM500 wear resistance property boiler plate, welcome to contact us.