1/2 equivalent material of nm500 steel material

The company adheres to the equivalent material of NM500 steel external market, internal management, quality and efficiency oriented development path, and has achieved good economic and social benefits. With strong financial strength, advanced management experience, excellent sales service, strict quality management system and scientific overall marketing means, we will work hand in hand with you for common development. We are making all efforts working on the optimization of equivalent material of NM500 steel quality and price and best service for all our customers.

S50C steel plate is a high-quality high-quality medium carbon steel. S stands for steel, which means iron, and 50 stands for carbon content of 0.50%. C represents carbon steel, which means that S50C is a carbon steel with a carbon content of 0.50%.Mechanical properties of S50C steel plate:Tensile strength σb (MPa): ≥630 (64); Yield strength σs (MPa): ≥375 (38); Elongation δ5 (%): ≥14; Reduction of area ψ (%): ≥40; Impact Work Akv (J): ≥31(4); Impact toughness value αkv (J/cm2): ≥39(4)Hardness: unheated, ≤241HB; annealed steel, ≤207HB

The yield point of the steel structure determines the stress that the structure can withstand without permanent deformation. The minimum yield point of typical carbon structural steel is 235MPa. The minimum yield point of typical low-alloy high-strength steel is 345MPa. Therefore, according to the proportional relationship of its yield point, the use of low-alloy high-strength steel allows the stress to be 1.4 times higher than that of carbon structural steel. Compared with equivalent material of NM500 steel, carbon structural steel, the use of low-alloy high-strength steel can reduce the size of structural parts and reduce weight.

Laser cutting equivalent material of NM500 steel has no burr, wrinkle and precision is high. It is superior to plasma cutting. Laser cutting has good cutting quality, narrow cutting width (generally 0.1-0.5m m), high accuracy (generally 0.1-0.4mm hole center distance error, 0.1-0.5mm contour dimension error), good surface roughness (generally Ra is 12.5-25μm), and the equivalent material of NM500 steel cutting seam can be welded without further processing. Fast cutting speed: for example, with 2kW laser power, the cutting speed of 8mm thick carbon steel is 1.6m/min.

Chemical composition of 42CrMo seamless steel pipe: C: 0.38-0.45, Si: 0.17-0.37, Mn: 0.50-0.80, Cr: 0.90-1.20, Mo: 0.15-0.25, V: 0.15-0.30. Mechanical properties of 42CrMo seamless steel pipe: tensile strength: 1080 MPa, yield strength: 930 MPa, elongation after fracture: 12%, reduction of area: 45%, impact energy: 63J. Due to the effect of carbon and chromium content, equivalent material of NM500 steel, 42CrMo seamless steel pipe has better strength and hardenability, higher fatigue strength and resistance to multiple impact after quenching and tempering, good impact toughness at low temperature and no obvious temper brittleness. It is generally used after quenching and tempering.

Due to other non-steel quality reasons caused by the customer dissatisfaction, to timely explain to the customer, and help them solve the problem, for the customer really because of their own reasons, to give patient reply.The process of objection handling is the process of our technical service.