What is the NM400 vs ar500 size range?

    
    NM400 vs AR500 Steel
    
    With two of the most popular steel grades on the market – NM400 and AR500 – it can be difficult to decide which one is right for your specific project. Here we’ll take a look at the differences between them and help you decide which one is best suited for your needs.
    
    NM400 is a high strength abrasion-resistant steel plate made by Japan's Nippon Steel Corporation. AR500 is an alloy steel that is even harder than NM400, but is also much more expensive. Both are popular types of steel, and are widely used for various applications.
    
    When comparing NM400 and AR500, it's important to keep in mind that the two steels are designed for different purposes. If a project requires superior wearing and abrasion resistance, then NM400 will almost certainly be the steel of choice. It is significantly harder than AR500 and is designed for heavy and punishing use in industrial or automotive applications.
    
    In contrast, AR500 is better suited for shooting range and hunting applications, as it offers superior ballistic resistance when used in the proper conditions. AR500 is much more expensive than NM400 and its higher cost reflects the extra performance you get with this high quality material.
    
    When it comes to size range, both NM400 and AR500 are available in a variety of sizes, ranging from 0.625” to 1” in thickness, 48” to 96” in width and 120” to 480” in length. NM400 offers higher yield strength than AR500, but with a lower maximum hardness rating. This makes NM400 a better choice for applications where superior abrasion resistance is a requirement.
    
    In terms of cost, NM400 is usually the least expensive option, making it the most cost effective for most projects. AR500, on the other hand, is usually the most expensive option, though its superior ballistic resistance makes it an important choice for shooting range applications.
    
    In conclusion, when deciding between NM400 and AR500, it is important to consider both their strengths and weaknesses. NM400 offers superior abrasion resistance and is generally the least expensive option. However, it does not offer the same ballistic resistance as AR500, which should be taken into consideration when selecting a steel grade for a specific application. On the other hand, AR500 is more expensive and may not be cost effective in many projects, but with its superior ballistic resistance, it is well suited to certain applications. In the end, the choice between NM400 and AR500 depends on the specific requirements of the project and should be made accordingly.