hardox 500 sheets supplier top 6 suppliers in Pakistan

Z-direction steel refers to thick steel with good tensile resistance in thickness direction. In the application of steel plate, the reason for additional performance requirements on the thickness direction of steel is due to the existence of defects in the thickness direction of steel in the process of casting and rolling. This defect makes the steel prone to lamellar tearing during welding, which reduces or even loses the design bearing capacity of application. The Z-direction performance is required for HARDOX 500 sheets supplier and so on steel plate with the tensile force along the plate thickness direction greater than or equal to 40mm.

During the steel plate cutting, the special-shaped steel plate cutting process is often carried out. In this operation process, some cutting curves will be generated. Therefore, there should be relatively high precision standards during the processing of HARDOX 500 sheets supplier. The operators need to have rich experience, and they also need to be proficient in the operation methods and working skills of the equipment, so as to ensure that the steel plate can meet the shape requirements after processing.

Our company regularly visits customers, consults and follows up the after-sales service, and directly solves problems for customers. In the use of our steel materials, whether quality problems or not, the after-sales will help solve the problem as soon as possible. We promise free life-long replacement for any product quality problems. The sound after-sales service system make you free from worries.

The defects of HARDOX 500 sheets supplier, wear-resistant plate in rolling process can be divided into raw material defects, surface spot defects, plate shape defects and edge defects. The so-called raw material defects refer to some defects caused by raw materials and kept or remained in the cold rolling process. The defects of raw materials usually include bubbles, inclusions, iron sheet pressing in, raw material scratches and roll marks. The stain defect of wear-resistant plate is mainly caused by the oil on the surface of strip steel and the iron powder produced during rolling, which is left on the surface of strip steel after rolling.