hardox 450 vs ar500 carbon steel plate and sheet 100 tons stock

The company's operation is based on the principle of "quality for survival, reputation for development". In terms of management, we adhere to the principle of people-oriented, service-oriented and customer-oriented. All staff of the company have the courage to open up, unite and forge ahead, and work hard to grasp the good situation of global economic development, actively strengthen communication with outstanding enterprises in the Hardox 450 vs ar500 industry, keep pace with the times, and move towards a new course!

SA387 Gr 11 Cl 1 steel has high brittle resistance, and also has good impact toughness in low temperature environments. It is suitable for refining and gas treatment in hydrogenation reaction and conversion equipment at high temperature. The maximum thickness of Hardox 450 vs ar500 products can reach 250mm. According to different thickness and impact requirements, the heat treatment of A387 Gr 11 Cl 1 plate can choose normalizing and tempering or normalizing and rapid cooling and tempering.

12Cr1MoVG high pressure boiler tube belongs to seamless steel tube. The manufacturing method of 12Cr1MoVG high pressure boiler tube is the same as that of seamless steel tube. High pressure boiler tubes are often in high temperature and high pressure conditions when they are used. Under the action of high temperature flue gas and steam, oxidation and corrosion will occur. Hardox 450 vs ar500, 12Cr1MoVG high pressure boiler tube is required to have high endurance strength, high oxidation resistance and corrosion resistance, and good microstructure stability.

At present, the cutting thickness limit of laser cutting is 20 mm. However, it should be noted that oxygen will be added into the laser beam to cut 20 mm thick Hardox 450 vs ar500 steel plate, which will form a thin oxide film on the cutting surface, which may affect the cutting quality, Therefore, attention should be paid to this point to avoid problems.

Hardox 450 vs ar500, API 5L X52 steel with the thickness range is 1.2-40mm, the width range is 1220-4200mm, and the length range is 5000-18000mm. API 5L X52 steel’s mechanical properties is the yield strength 300MPa, and the tensile strength 460MPa. To be specified in details: Maximum content for C≤0.28%, Mn≤1.4%, P≤0.030%, S is 0.030%, V+Nb+Ti≤0.15%, Copper maximum is 0.50%, nickel maximum 0.50%, chromium 0.50%, Molybdenum 0.15%.

When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.