Export standard of nm450 wear-resistance material to Thailand with 4200 tons

standard of NM450 wear-resistance, Hot rolled seamless tube is usually produced on automatic tube rolling mill. After the solid tube blank is inspected and the surface defects are removed, it is cut to the required length, centered on the end face of the piercing end of the tube blank, then sent to the heating furnace for heating, and perforated on the piercing machine.

NM500 wear plate is Chinese abrasion resitant steel. NM500 steel is equivalent to AR500, HARDOX500, XAR500 and so on materials. The surface Brinell hardness of NM500 wear plate is ≥470 HBW. The NM500 steel is consists of max. 0.38% Carbon, 0.70 Silicon, 1.70 Manganese, 0.020 Phosphorus, 0.010 Sulfur, 1.20 Chrome, 1.00 Nickel, 0.65 Molybdenum, 0.050 Titanium, 0.0005-0.006 Boron, min. 0.010 Als, etc.. According to GBT24186, the max. thickness of standard of NM450 wear-resistance, NM500 wear plate is 70mm.

Considering the large workload of allocation and transportion for our steel materials, we have built special shipping department, and make it independent form transportation department. The transportation department is in charge of transporting steel materials from our mill and warehouse to the port, and our shipping department is in charge of the shipping matters. So that our whole shipping efficiency is improved, and shorten time for customers to receive goods.

Flat steel is a kind of steel with rectangular cross-section and blunt edges at the edges and corners. It is usually 12-300 mm wide and 3-60 mm thick. Compared with standard of NM450 wear-resistance ordinary steel plate, the utilization rate of flat steel is increased by one to five percentage points. Moreover, flat steel can be produced with fixed thickness, width and length according to the user's requirements, which saves the cutting process for users, reduces the consumption of labor and materials, and also reduces the processing loss of raw materials, saving time, labor and material.